A problem starting right after a firmware update, a new host pairing or a software install should be checked against that specific change before a full reset. For Apple Watch magnetic charging, first remove case, clean/dry surfaces and test a known supported puck/adapter.
What this covers
- Apple Watch magnetic charging with this exact failure state
- Diagnosis across watch back/case versus puck, adapter, outlet and battery condition
What it does not cover
Try in this order
0 of 4 completedCapture the exact failure state
ReversibleNote the exact firmware version or newly paired host, and confirm the prior working state. Expected behavior: align and gain charge at a safe temperature using supported power.
Isolate the component boundary
ReversibleRemove case, clean/dry surfaces and test a known supported puck/adapter. Test with the new pairing removed, or check for a known-issue note for the firmware version. Boundary to separate: watch back/case versus puck, adapter, outlet and battery condition.
Correct only the proven cause
ReversibleReplace the failed external component or service the battery. Apply the vendor's fix for the update, or remove the conflicting extra pairing.
Verify and stop safely
ReversibleConfirm normal operation with the change present across at least one full session. Stop for swelling, heat, cracked back glass, liquid or damaged cable.
Evidence ledger
Sources behind this answer
Exact questions