Exact model-family answer directory

Maytag MED7230 electric dryer troubleshooting

Choose the symptom actually shown by MED7230H*. Maytag dryer; confirm electric/gas model and complete suffix. Error codes remain separate records because the same characters can mean different things on another platform.

not heatingtakes too longwon't startstopsdrum not turningsquealing

Reviewed records

12 exact answers

Not sure where the fault is?

Maytag · no power

Maytag MED7230 electric dryer has no power or a blank display

For the Maytag MED7230 electric dryer, prove both breaker poles for electric models, the outlet and control wake state before internal service.

Open record Maytag · drum not turning

Maytag MED7230 electric dryer heats or runs but the drum does not tumble

For the Maytag MED7230 electric dryer, a nonturning drum with motor sound commonly crosses the belt, idler, roller or drive-motor boundary.

Open record Maytag · wrinkled

Maytag MED7230 electric dryer leaves clothes wrinkled or tangled

For the Maytag MED7230 electric dryer, load size, fabric mix, heat and prompt removal normally matter more than hardware.

Open record Maytag · squealing

Maytag MED7230 electric dryer makes squealing, thumping, scraping or rattling noises

For the Maytag MED7230 electric dryer, match the sound to drum speed, warm-up and load before replacing parts.

Open record Maytag · not heating

Maytag MED7230 electric dryer runs but does not heat

For the Maytag MED7230 electric dryer, airflow, cycle choice and household power or gas supply should be proved before heater or valve service.

Open record Maytag · sensor dry

Maytag MED7230 electric dryer sensor cycle ends too early or runs too long

For the Maytag MED7230 electric dryer, small/mixed loads, dirty sensor bars and poor airflow can mislead moisture sensing.

Open record Maytag · vent code

Maytag MED7230 electric dryer shows a vent, airflow or blockage warning

For the Maytag MED7230 electric dryer, treat a vent warning as measured airflow loss, not as a code to clear and ignore.

Open record Maytag · burning smell

Maytag MED7230 electric dryer smells hot, scorched or like burning

For the Maytag MED7230 electric dryer, stop the dryer until lint, airflow, foreign material and electrical or belt overheating are separated.

Open record Maytag · stops

Maytag MED7230 electric dryer stops before the cycle is finished

For the Maytag MED7230 electric dryer, a stop can be sensor completion, overheating protection, door interruption or power loss.

Open record Maytag · takes too long

Maytag MED7230 electric dryer takes too long to dry clothes

For the Maytag MED7230 electric dryer, a restricted exhaust is the first safety and performance check when drying time increases.

Open record Maytag · Wi-Fi

Maytag MED7230 electric dryer will not connect to Wi-Fi or the manufacturer's app

For the Maytag MED7230 electric dryer, confirm that the exact model has wireless hardware and supports the current app before network changes.

Open record Maytag · won't start

Maytag MED7230 electric dryer will not start

For the Maytag MED7230 electric dryer, prove power, door switch, control lock and the Start-button hold behavior before internal repair.

Open record

Confirm the model first

Which units this covers, and how to tell yours is one of them

Every answer below is scoped to these model identifiers. A neighbouring model in the same line can use a different part, a different reset sequence or a different radio, so matching the identifier before following a procedure is the step that decides whether the rest of the page applies to you.

Model numbers and patterns: MED7230H*
What that covers: Maytag dryer; confirm electric/gas model and complete suffix.

Published specification

What is true of this model and changes how you fix it

These are the properties that decide which procedure applies. Each is read from the manufacturer’s own published figures for this model, not carried over from a sibling that shares its retail name.

Fuel — ELECTRIC (vented): ELECTRIC vented dryer on 240V. No heat with the drum turning is often a half-tripped double breaker; reset both halves first. Vent must be clear.
Venting: Clogged lint screen or blocked duct is the top cause of long drying/overheating.
Features: Extra Power option and Advanced Moisture Sensing; Wi-Fi on smart builds.

Where these figures were read. maytag.com MED7230 (ELECTRIC vented), read 2026-09-01

Manufacturer support for this product line. Maytag Product Help — Product Help. Official Maytag model, use, installation, maintenance and error-code guidance.

Exact questions

Questions that only have an answer for the Maytag MED7230 electric dryer

Each answer below uses this model’s own published figures. The same question asked about a different model in the line has a different answer, which is why it is answered here rather than on a general page.

Why is my Maytag MED7230 drying so slowly?+

Slow drying is airflow: clean the lint screen every load and clear the exhaust duct to the outside — a restricted vent traps moist air and drags out the cycle. Use the Extra Power option for thick loads, dry similar fabrics together, and avoid overloading. A total lack of heat is different (breaker or element), but slow drying is nearly always the vent.

Structured depth, not empty permutations

Every published record carries a direct answer, scope, ordered fixes, risk notes and sources.

Device and manufacturer hubs share a consistent record system, but each answer carries the relevant controls, fault boundaries, consequences and official support entry point for that platform.

See the publication gate