On a Speed Queen TR7 the water level follows the Load Size setting. Auto Fill fills to the minimum for the cycle, senses the load once the wash begins and may add water, while the manual Small to Large levels are fixed. A level that looks low is usually Auto Fill working as designed, the Normal Eco spray rinse, or a slow fill from clogged screens or low house pressure. A washer that cannot reach its level flashes the Wash and Rinse lights twice, and one that cannot sense it flashes them once.
Differential
Likely causes of “Speed Queen TR7 top-load washer uses very little water or the water level looks wrong”, and how to tell them apart
- 1
Auto Fill sensing a small load
What separates it The tub fills to a minimum and adds water after agitation begins
How to confirm Watch through the first minutes of the wash; the guide says more water may be added once the load is sensed
- 2
Load Size set below what the load needs
What separates it The clothes are barely covered because Load Size is set below what the load needs
How to confirm Choose a larger Load Size or Auto Fill
- 3
Clogged screens or low water pressure
What separates it The fill takes a long time and never reaches the mark
How to confirm Clean the screens and check both faucets are fully open
- 4
The Normal Eco spray rinse
What separates it The tub is not filled for the rinse because of the Normal Eco spray rinse
How to confirm Confirm the cycle that you chose, since this spray rinse is by design and not a fault
Before you touch a setting
Record this first — changing settings destroys the evidence
- The Load Size setting and cycle chosen
- Whether the level rises after the wash begins
- The condition of the faucets, hoses and screens
Try in this order
0 of 5 completedPick a level that fits
ReversibleUse Auto Fill or a larger manual level so clothes move freely in the water.
Wait for sensing
ReversibleWait for the sensing, and with Auto Fill, watch the first minutes of agitation, since extra water may be added.
Open the faucets fully
ReversibleOpen the faucets fully, since both the hot and the cold faucets must be fully on.
Clean the screens
ReversibleClean the screens, by rinsing the hose end and mixing valve screens, using part number 803615 for the hose end screen.
Check the cycle
ReversibleRemember the Normal Eco spray rinse; pick another cycle if you want a full rinse fill.
Model-specific
What is true of this model and not of its siblings
- Parts for this problem on the TR7 (RepairClinic, 2026-09-20)
- water level pressure switch, part number 202470, at $8.53.
- Other models this page answers
- These steps also fit the TC5 classic-clean top-load washer, TR5 top-load washer, FF7 front-load washer.
Stop boundary
When this stops being a self-service repair
- !If the Wash and Rinse lights flash after cleaning the screens, call service
- !If the Wash and Rinse lights flash once, the guide says the control has trouble sensing the water level; unplug the washer and call service
Evidence ledger
Sources behind this answer
A dealer listing giving the TR7's capacity and cabinet size.
Parts and list prices as shown on RepairClinic's parts search for this model number on 2026-09-20.
Exact questions
Common questions
What does Auto Fill do on the TR7?+
It fills to the minimum level for the cycle, then senses the load and may add water.
Why is the TR7 water level low in Normal Eco?+
The guide says the rinse portion of Normal Eco uses a spray instead of filling the tub.
What does one flash of the Wash and Rinse lights mean?+
The control has trouble sensing the water fill level; unplug the washer and call service.
Can low house pressure affect the level?+
Yes. The guide ties slow filling and leaking to low water pressure and clogged screens.
How do I clean the fill screens?+
Turn off the water, remove the hoses and clean the screens; replace them if damaged.
Can I choose the level myself?+
Yes. Pick a manual Load Size instead of Auto Fill, sized to the load.