Direct answer
On the covered Amana dishwasher, F1 E1 means Amana attributes this to the control module. First, note whether the code returns after one documented power reset.
Definition versus diagnosis
The display names a detected condition—not an automatically failed part.
What this covers
- Amana dishwasher covered by the cited source
- Displayed code or documented alias: F1 E1
- The exact operating state described by the manufacturer
What it does not cover
- ×Another product type or original-manufacturer platform
- ×A visually similar but different code
- ×Internal live electrical, sealed-system, gas, battery-cell or control-board repair
Match every character and the exact product
ReversiblePhotograph the complete display and product label. This record covers F1 E1 on Amana electronic-control dishwashers. Code availability and the button sequence used to display them vary by model; confirm against the model's own manual.
Preserve the failure state
ReversibleNote whether the code returns after one documented power reset. Record the operating stage, recent change and what still works before clearing the message.
Correct only the documented fault domain
ReversibleCycle power for 30 seconds; arrange control service if it returns. A power reset is the whole of what Amana publishes for this code: remove power for 30 seconds, restore it, and watch whether the code returns. If it does, the reset is not the answer and repeating it will not make it one.
Verify once, then respect the service boundary
ReversibleRepeat only the shortest safe action that reaches the original stage. Amana specifies a 30 seconds power interruption for this code, not an arbitrary one. If F1 E1 returns, stop repeated resets and use model-specific manufacturer support.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Exact questions
Common follow-ups
What does F1 E1 mean on a Amana dishwasher?+
Amana attributes this to the control module.
Can I reset F1 E1 without fixing the cause?+
A reset may hide the display temporarily but does not correct the documented fault. Record the code and complete only the safe checks first.
Why is the complete model number required?+
Manufacturers reuse characters across platforms. The model number determines which official table, controls and service boundary apply.
When should I stop?+
Stop for smoke, arcing, burning odor, uncontrolled water, gas odor, battery swelling, extreme heat or any condition the manufacturer directs to professional service.
Answer for the exact device and software version shown above.