On the covered Amana top-load washer, F7 E9 means the motor did not move when the control powered it, or the control lost contact with it First, unplug the washer and turn the basket by hand. Then: free anything jamming the basket; if nothing is jamming it, the drive motor is replaced.
Differential
Likely causes of “Amana top-load washer code F7 E9”, and how to tell them apart
- 1
The motor did not turn when the control powered it, or a communication fault was reported
What separates it The washer fills and then stands still, or hums
How to confirm Turn the basket by hand with the washer unplugged
- 2
A basket jammed by an item between the basket and the tub
What separates it The basket will not turn freely by hand
How to confirm Look and feel for a coin, a wire or a sock
- 3
A worn drive coupling
What separates it The motor spins but the basket does not
How to confirm A technician inspects the coupling
- 4
A motor that has failed
What separates it The basket turns freely but the motor is silent
How to confirm The motor is tested and replaced
- 5
Loose wiring or a control fault
What separates it The harness at the motor or board is loose
How to confirm A technician checks the connectors
Before you touch a setting
Record this first — changing settings destroys the evidence
- That the code is F7 E9
- Whether the basket turns freely by hand
- What the washer does after the fill
- The model number
Try in this order
0 of 9 completedWhat to do first
Reversibleunplug the washer and turn the basket by hand.
Correct only the documented fault domain
ReversibleFree anything jamming the basket; if nothing is jamming it, the drive motor is replaced. Amana documents these checks for this code: did you receive an F7E9; and cycle power to the control to reset the washer. Work them in that order and correct only what you actually find.
Unplug the washer
ReversibleWait a minute before looking inside.
Turn the basket by hand
ReversibleIt should rotate with moderate resistance.
Look for a jam
ReversibleCheck between the basket and the tub for small items.
Level the washer
ReversibleAn unlevel washer strains the drive.
Cycle the power
ReversiblePlug in and run a short rinse.
Book service
ReversibleA drive motor or coupling is replaced if nothing was jamming the basket.
Verify once, then respect the service boundary
ReversibleAmana specifies a 5 minutes power interruption for this code, not an arbitrary one.
Model-specific
What is true of this model and not of its siblings
- The code on this page
- F7 E9, a motor start or communication fault.
- Parts involved
- The drive motor, the coupling and the wiring.
- Related
- F7 E7 is the speed fault on the same platform.
- Why this code is taken seriously
- A drive that does not respond can overheat the motor, so the control stops the wash rather than keep trying. Leave the washer unplugged until you have checked for a jam, and do not run repeated cycles to see whether the code returns.
- Cost and age
- On an older washer, a new drive motor can cost a good part of the price of a new machine, so ask for a quote before agreeing to the repair and weigh it against the age of the washer.
Stop boundary
When this stops being a self-service repair
- !If the basket turns freely and F7 E9 returns, book Amana service
- !Never reach into a washer whose basket may spin
- !A hot, burning smell means stop and unplug
Evidence ledger
Sources behind this answer
Exact questions
Common questions
What does F7 E9 mean on a Amana top-load washer?+
the motor did not move when the control powered it, or the control lost contact with it
Can I fix it myself?+
Clearing a jam is a home job; replacing the motor is not.
Is the washer dangerous to use?+
A washer that tries to spin against a jam can strain the motor, so leave it off.
Is the code the same as F7 E7?+
No, F7 E7 is a motor that could not reach its speed.
What is the first test?+
Turning the basket by hand with the power off.
Is an F7 E9 repair worth it on an old washer?+
It depends on the quote and the washer's age; a jam is a free fix, but a new motor on a very old machine often is not worth it.