A problem starting right after a firmware update, a new host pairing or a software install should be checked against that specific change before a full reset. For Garmin satellite acquisition and track, first sync fully, update and wait stationary outdoors with clear sky.
What this covers
- Garmin satellite acquisition and track with this exact failure state
- Diagnosis across watch assistance data versus sky view, mode, travel and antenna hardware
What it does not cover
Try in this order
0 of 4 completedCapture the exact failure state
ReversibleNote the exact firmware version or newly paired host, and confirm the prior working state. Expected behavior: lock supported satellite systems outdoors and record a plausible route.
Isolate the component boundary
ReversibleSync fully, update and wait stationary outdoors with clear sky. Test with the new pairing removed, or check for a known-issue note for the firmware version. Boundary to separate: watch assistance data versus sky view, mode, travel and antenna hardware.
Correct only the proven cause
ReversibleChoose the appropriate satellite mode or service hardware that never locks. Apply the vendor's fix for the update, or remove the conflicting extra pairing.
Verify and stop safely
ReversibleConfirm normal operation with the change present across at least one full session. Do not rely on a failing consumer watch as sole emergency navigation.
Evidence ledger
Sources behind this answer
Exact questions