An accessory that cuts out and reconnects is usually Bluetooth interference, a weak connection profile or low battery, not a hardware defect. For PlayStation HDMI video output, first connect directly with a known cable and start in the supported safe video mode.
What this covers
- PlayStation HDMI video output with this exact failure state
- Diagnosis across console versus TV input, cable, receiver and saved video mode
What it does not cover
Try in this order
0 of 4 completedCapture the exact failure state
ReversibleNote the accessory's distance from the host, nearby 2.4 GHz devices, and its remaining battery percentage. Expected behavior: negotiate a stable supported resolution, HDR and refresh rate.
Isolate the component boundary
ReversibleConnect directly with a known cable and start in the supported safe video mode. Test at close range with other Bluetooth devices turned off, and with the accessory freshly charged. Boundary to separate: console versus TV input, cable, receiver and saved video mode.
Correct only the proven cause
ReversibleCorrect resolution/HDCP/VRR or replace the failed path. Move interfering devices away, forget and re-pair the connection, or replace a degraded battery.
Verify and stop safely
ReversibleRun the same activity that triggered the cutout for at least 20 minutes at normal range. Stop for hot/bent HDMI hardware or signal loss when the fixed port moves.
Evidence ledger
Sources behind this answer
Exact questions