Direct answer
For the Canon MAXIFY GX4020, printer LAN connection, same-network discovery, guest isolation, protocol support and app permissions should be separated. First, confirm the printer and phone are on the same primary network.
What this covers
- Canon MAXIFY GX4020 (5779C002)
- Canon printer; PIXMA/MegaTank/MAXIFY/imageCLASS ink/toner systems and maintenance paths differ.
- The specific fault this record addresses: will not AirPrint, Mopria or print from a phone
What it does not cover
- ×The same symptom on a different Canon product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
The phone is on a different network from the printer
What separates it The printer does not appear in the phone's print dialog at all.
How to confirm A guest network, or separate 2.4 and 5 GHz networks the router treats as isolated, are the usual causes.
- 2
Client isolation is blocking discovery
What separates it Both devices are demonstrably on the same network and the printer still does not appear.
How to confirm Client or AP isolation prevents devices communicating and is on by default on many guest and mesh configurations.
- 3
A VPN on the phone is blocking local discovery
What separates it Discovery stopped after a VPN was installed or enabled.
How to confirm Many VPNs route local network traffic away from the local segment. Disable it for one test.
- 4
The printer does not support the standard
What separates it An older printer that never appears despite the network being correct.
How to confirm Check whether the model supports AirPrint or Mopria. The manufacturer's own app is the alternative where it does not.
- 5
The printer is asleep and not responding to discovery
What separates it It appears sometimes and not others, typically first thing.
How to confirm Wake the printer and retry; the sleep timer is usually adjustable.
- 6
Mesh networks are placing devices on different bands
What separates it Intermittent discovery on a mesh system.
How to confirm Some mesh systems separate bands or nodes in ways that break local discovery. Check whether the mesh has a setting for this.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- Whether the phone and printer are on exactly the same network, including the same band.
- Whether a VPN is active on the phone.
- Whether the printer supports AirPrint or Mopria at all.
- Whether discovery is consistently absent or intermittent.
Put the phone and printer on the same network, avoiding guest networks
ReversibleThis is the most common cause, and on some routers the two bands count as separate segments.
Disable any VPN on the phone for one test
ReversibleMany VPNs route local discovery traffic away from the local network.
Wake the printer and retry
ReversibleA sleeping printer may not answer discovery, which shows as intermittent availability.
Confirm the model supports AirPrint or Mopria
ReversibleWhere it does not, the manufacturer's own app is the supported path.
Check the router for client isolation and disable it on the main network
ReversibleIt blocks exactly the device-to-device traffic discovery depends on.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- 5779C002. Canon printer; PIXMA/MegaTank/MAXIFY/imageCLASS ink/toner systems and maintenance paths differ.
- Type — BUSINESS refillable INK TANK all-in-one (MAXIFY)
- A business MAXIFY MegaTank AIO — refillable ink BOTTLES with pigment inks and office features, below the GX7021 in speed/capacity. Still inkjet, so the printhead can CLOG if unused.
- Pigment ink + volume
- Pigment inks for durable documents; very low running cost. Don't run tanks dry; initial charging uses some starter ink (normal).
- Connectivity
- Wi-Fi/Ethernet/USB via the Canon app; 'offline' is usually a network/queue issue.
- Symptom boundary
- This record covers Canon MAXIFY GX4020 when it will not AirPrint, Mopria or print from a phone. A different symptom on the same hardware, or this symptom on a different Canon product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Do not expose a printer directly to the internet or forward ports to it — printers are a well-documented entry point onto home networks.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. Canon publishes this as "Print using AirPrint from your iOS device - iPhone or iPad". Canon's AirPrint page: same-network requirement and how the printer must appear before an iPhone can print to it. Probed 2026-08-21: title-verified. What that article does not carry is the model boundary — it is written for a product line, and 5779C002 is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
My Canon MAXIFY GX4020 prints faded with full ink tanks.+
That is a printhead clog — the MAXIFY is a refillable inkjet, so full tanks do not prevent clogs, especially if it has been idle. Run the nozzle check then Cleaning and, if needed, Deep Cleaning from the menu/software, printing a pattern after each to gauge improvement. Make sure no tank was run dry (air in the lines clogs it). Print regularly to keep the head clear. The pigment ink and tank refills keep running costs very low for office use.
My iPhone can't see the printer.+
Check that the phone and the printer are on exactly the same network — not a guest network, and on some routers not a different band either, since a few treat 2.4 and 5 GHz as separate segments. If they are the same, disable any VPN on the phone for one test, because many VPNs route local discovery traffic away from the local network entirely.
Does this answer apply to every Canon model?+
No. It is scoped to 5779C002. Canon printer; PIXMA/MegaTank/MAXIFY/imageCLASS ink/toner systems and maintenance paths differ.
What should I record before troubleshooting AirPrint or Mopria or phone printing?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing AirPrint, Mopria, phone printing. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Do not disable the firewall globally to enable discovery.
Answer for the exact device and software version shown above.