An appliance problem limited to one cycle, load, zone or operating condition should be separated from a component that fails every time. For dryer exhaust airflow, first run briefly and compare airflow/temperature at the exterior with the duct inspected.
What this covers
- dryer exhaust airflow with this exact failure state
- Diagnosis across lint screen/internal path versus transition duct, wall vent and exterior hood
What it does not cover
Try in this order
0 of 4 completedCapture the exact failure state
ReversibleName the failing cycle, load, zone or operating condition and one safe condition that still works. Expected behavior: move heated moist air through the full vent to the exterior.
Isolate the component boundary
ReversibleRun briefly and compare airflow/temperature at the exterior with the duct inspected. Change only the cycle, load, temperature, zone or installation condition while keeping the appliance setup unchanged. Boundary to separate: lint screen/internal path versus transition duct, wall vent and exterior hood.
Correct only the proven cause
ReversibleClean the full path and correct crushed, long or unsafe ducting. Correct the isolated selection, loading, installation or operating condition.
Verify and stop safely
ReversibleRepeat the safe controlled cycle and compare the known-working condition. Stop heated use for weak airflow, excessive heat, burning odor or blocked vent.
Evidence ledger
Sources behind this answer
Exact questions