Dishes, laundry or food coming out wrong — still dirty, still wet, unevenly cooked — usually traces to loading, cycle selection or a supply issue, not a failed appliance. For dryer exhaust airflow, first run briefly and compare airflow/temperature at the exterior with the duct inspected.
What this covers
- dryer exhaust airflow with this exact failure state
- Diagnosis across lint screen/internal path versus transition duct, wall vent and exterior hood
What it does not cover
Try in this order
0 of 4 completedCapture the exact failure state
ReversibleRecord the exact cycle, load size and any additive, such as detergent or rinse aid, used for the bad result. Expected behavior: move heated moist air through the full vent to the exterior.
Isolate the component boundary
ReversibleRun briefly and compare airflow/temperature at the exterior with the duct inspected. Repeat with a smaller, correctly loaded test batch and the manufacturer-recommended additive amount. Boundary to separate: lint screen/internal path versus transition duct, wall vent and exterior hood.
Correct only the proven cause
ReversibleClean the full path and correct crushed, long or unsafe ducting. Correct the loading pattern, cycle selection or additive amount proven by the comparison.
Verify and stop safely
ReversibleRun one more normal-sized load and confirm the correct result with the fix applied. Stop heated use for weak airflow, excessive heat, burning odor or blocked vent.
Evidence ledger
Sources behind this answer
Exact questions