Dishes, laundry or food coming out wrong — still dirty, still wet, unevenly cooked — usually traces to loading, cycle selection or a supply issue, not a failed appliance. For dryer moisture-sensor cycle, first compare the same towel load on Timed Dry and Sensor Dry.
What this covers
- dryer moisture-sensor cycle with this exact failure state
- Diagnosis across small/mixed load versus sensor bars, airflow and control
What it does not cover
Try in this order
0 of 4 completedCapture the exact failure state
ReversibleRecord the exact cycle, load size and any additive, such as detergent or rinse aid, used for the bad result. Expected behavior: sense damp fabric contact and end when the load reaches target dryness.
Isolate the component boundary
ReversibleCompare the same towel load on Timed Dry and Sensor Dry. Repeat with a smaller, correctly loaded test batch and the manufacturer-recommended additive amount. Boundary to separate: small/mixed load versus sensor bars, airflow and control.
Correct only the proven cause
ReversibleClean sensor bars by approved method and group similar fabrics. Correct the loading pattern, cycle selection or additive amount proven by the comparison.
Verify and stop safely
ReversibleRun one more normal-sized load and confirm the correct result with the fix applied. Service cycles that end immediately with a normal damp load and clean sensors.
Evidence ledger
Sources behind this answer
Exact questions