Exact model-family answer directory

Samsung DV45K6500 dryer troubleshooting

Choose the symptom actually shown by DV45K6500*. Samsung dryer; the DV-prefix model number alone does not state electric versus gas — check the rating plate or full model suffix before applying either supply's diagnosis. Error codes remain separate records because the same characters can mean different things on another platform.

not heatingtakes too longwon't startstopsdrum not turningsquealing

Reviewed records

12 exact answers

Not sure where the fault is?

Samsung · no power

Samsung DV45K6500 dryer has no power or a blank display

For the Samsung DV45K6500 dryer, prove both breaker poles for electric models, the outlet and control wake state before internal service.

Open record Samsung · drum not turning

Samsung DV45K6500 dryer heats or runs but the drum does not tumble

For the Samsung DV45K6500 dryer, a nonturning drum with motor sound commonly crosses the belt, idler, roller or drive-motor boundary.

Open record Samsung · wrinkled

Samsung DV45K6500 dryer leaves clothes wrinkled or tangled

For the Samsung DV45K6500 dryer, load size, fabric mix, heat and prompt removal normally matter more than hardware.

Open record Samsung · squealing

Samsung DV45K6500 dryer makes squealing, thumping, scraping or rattling noises

For the Samsung DV45K6500 dryer, match the sound to drum speed, warm-up and load before replacing parts.

Open record Samsung · not heating

Samsung DV45K6500 dryer runs but does not heat

For the Samsung DV45K6500 dryer, airflow, cycle choice and household power or gas supply should be proved before heater or valve service.

Open record Samsung · sensor dry

Samsung DV45K6500 dryer sensor cycle ends too early or runs too long

For the Samsung DV45K6500 dryer, small/mixed loads, dirty sensor bars and poor airflow can mislead moisture sensing.

Open record Samsung · vent code

Samsung DV45K6500 dryer shows a vent, airflow or blockage warning

For the Samsung DV45K6500 dryer, treat a vent warning as measured airflow loss, not as a code to clear and ignore.

Open record Samsung · burning smell

Samsung DV45K6500 dryer smells hot, scorched or like burning

For the Samsung DV45K6500 dryer, stop the dryer until lint, airflow, foreign material and electrical or belt overheating are separated.

Open record Samsung · stops

Samsung DV45K6500 dryer stops before the cycle is finished

For the Samsung DV45K6500 dryer, a stop can be sensor completion, overheating protection, door interruption or power loss.

Open record Samsung · takes too long

Samsung DV45K6500 dryer takes too long to dry clothes

For the Samsung DV45K6500 dryer, a restricted exhaust is the first safety and performance check when drying time increases.

Open record Samsung · Wi-Fi

Samsung DV45K6500 dryer will not connect to Wi-Fi or the manufacturer's app

For the Samsung DV45K6500 dryer, confirm that the exact model has wireless hardware and supports the current app before network changes.

Open record Samsung · won't start

Samsung DV45K6500 dryer will not start

For the Samsung DV45K6500 dryer, prove power, door switch, control lock and the Start-button hold behavior before internal repair.

Open record

Confirm the model first

Which units this covers, and how to tell yours is one of them

Every answer below is scoped to these model identifiers. A neighbouring model in the same line can use a different part, a different reset sequence or a different radio, so matching the identifier before following a procedure is the step that decides whether the rest of the page applies to you.

Model numbers and patterns: DV45K6500*
What that covers: Samsung dryer; the DV-prefix model number alone does not state electric versus gas — check the rating plate or full model suffix before applying either supply's diagnosis.

Published specification

What is true of this model and changes how you fix it

These are the properties that decide which procedure applies. Each is read from the manufacturer’s own published figures for this model, not carried over from a sibling that shares its retail name.

Fuel — confirm ELECTRIC or GAS: This series shipped in both electric (DVE45K6500E) and gas (DVG45K6500G) versions — check your model's suffix, because it changes the no-heat diagnosis entirely: electric = element/240V half-breaker/thermal fuse; gas = igniter/valve coils/flame sensor/gas supply.
Venting: A vented dryer: clogged lint screen or blocked exhaust duct is the top cause of long drying and overheating — clean both regularly.
Features: Steam Sanitize, Sensor Dry (cycle time varies with the load). An older-generation Samsung dryer.

Where these figures were read. samsung.com DV45K6500 (vented dryer, Steam) — confirm electric (DVE) or gas (DVG) suffix, read 2026-09-01

Manufacturer support for this product line. Samsung Support — Samsung washing machine information and error codes. Samsung's own washer troubleshooting and error-code article; covers filling, draining, spin and unbalanced-load conditions.

Exact questions

Questions that only have an answer for the Samsung DV45K6500 dryer

Each answer below uses this model’s own published figures. The same question asked about a different model in the line has a different answer, which is why it is answered here rather than on a general page.

How do I know if my Samsung DV45K6500 is gas or electric?+

Check the full model number and the connection behind it: an electric model (…E) has a thick 240V power cord and a four-prong outlet; a gas model (…G) has a standard 120V plug plus a gas line. It matters because a no-heat fault is diagnosed completely differently — element and 240V breaker for electric, gas igniter and valve for gas.

Structured depth, not empty permutations

Every published record carries a direct answer, scope, ordered fixes, risk notes and sources.

Device and manufacturer hubs share a consistent record system, but each answer carries the relevant controls, fault boundaries, consequences and official support entry point for that platform.

See the publication gate