Direct answer
A wrong result requires checking inputs, mode, calibration and output separately; a working control path can still be configured for the wrong state. For induction cookware detection, first test a known magnetic flat pan that meets the minimum diameter.
What this covers
- induction cookware detection with this exact failure state
- Diagnosis across cookware versus zone, sensor, control lock and power
- Customer-accessible observation, settings and external components
What it does not cover
- ×A displayed manufacturer error code with a different documented meaning
- ×Live electrical, sealed-system, internal battery-cell or gas repair
- ×A claim that every model exposes identical controls
Capture the exact failure state
ReversibleWrite down the selected mode, input conditions and the exact unexpected output. Expected behavior: recognize a flat magnetic pan of supported base size centered on the zone.
Isolate the component boundary
ReversibleTest a known magnetic flat pan that meets the minimum diameter. Use a known reference input or manufacturer test and compare the result. Boundary to separate: cookware versus zone, sensor, control lock and power.
Correct only the proven cause
ReversibleChange cookware/position or service a zone that detects no supported pan. Correct the setting, calibration or component proven by that comparison.
Verify and stop safely
ReversibleRepeat with the reference and a normal real-world case. Stop for cracked glass, smoke, arcing or breaker trips.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Exact questions
Common follow-ups
What should I check first when induction cookware detection has this problem?+
Test a known magnetic flat pan that meets the minimum diameter.
Why not factory-reset immediately?+
The useful boundary is cookware versus zone, sensor, control lock and power. A reset can erase state without proving which side failed.
When should I stop troubleshooting?+
stop for cracked glass, smoke, arcing or breaker trips.
Answer for the exact device and software version shown above.