Direct answer
On the covered Amana dryer, F2 E1, F2 E2 and F3 E3 mean Amana publishes a page for this code but does not state a cause for it — their guidance is a controlled power reset. Treat any specific cause you find elsewhere as unverified. First, record the exact code and when in the cycle it appeared, before resetting.
Definition versus diagnosis
The display names a detected condition—not an automatically failed part.
What this covers
- Amana dryer covered by the cited source
- Displayed code or documented alias: F2 E1, F2 E2 and F3 E3
- The exact operating state described by the manufacturer
What it does not cover
- ×Another product type or original-manufacturer platform
- ×A visually similar but different code
- ×Internal live electrical, sealed-system, gas, battery-cell or control-board repair
Match every character and the exact product
ReversiblePhotograph the complete display and product label. This record covers F2 E1, F2 E2 and F3 E3 on Amana electronic-control dryers. Code availability varies by model and fuel type; a gas and an electric dryer of the same series do not display the same set of codes.
Preserve the failure state
ReversibleRecord the exact code and when in the cycle it appeared, before resetting. Record the operating stage, recent change and what still works before clearing the message.
Correct only the documented fault domain
ReversibleAmana's documented step: power the unit down at the circuit breaker for one minute, power up, start a timed dry cycle and watch for one minute to see whether the code returns; arrange service if the code returns. A power reset is the whole of what Amana publishes for this code: remove power for 1 minute, restore it, and watch whether the code returns. If it does, the reset is not the answer and repeating it will not make it one.
Verify once, then respect the service boundary
ReversibleRepeat only the shortest safe action that reaches the original stage. Amana specifies a 1 minute power interruption for this code, not an arbitrary one. If F2 E1, F2 E2 and F3 E3 returns, stop repeated resets and use model-specific manufacturer support.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Amana's own page for this code, read 2026-08-20.
Amana's own page for this code, read 2026-08-20.
Amana's own page for this code, read 2026-08-20.
Exact questions
Common follow-ups
What does F2 E1, F2 E2 and F3 E3 mean on a Amana dryer?+
Amana publishes a page for this code but does not state a cause for it — their guidance is a controlled power reset. Treat any specific cause you find elsewhere as unverified.
Can I reset F2 E1, F2 E2 and F3 E3 without fixing the cause?+
A reset may hide the display temporarily but does not correct the documented fault. Record the code and complete only the safe checks first.
Why is the complete model number required?+
Manufacturers reuse characters across platforms. The model number determines which official table, controls and service boundary apply.
When should I stop?+
Stop for smoke, arcing, burning odor, uncontrolled water, gas odor, battery swelling, extreme heat or any condition the manufacturer directs to professional service.
Answer for the exact device and software version shown above.