Bradford White gas water heater code 1 flash then pause: meaning and exact next steps
1 flash then pause (ICON V1) means ICON System V1 control: normal operation. Either the gas control is powered and waiting for the set-point knob to be turned to a water temperature, or the water heater is satisfied and operating normally. If the knob is in the PILOT position and pilot flame is detected, turn the knob to the desired setting. This answer applies only to Bradford White Defender Safety System (flammable-vapor-ignition-resistant) residential gas water heaters in the RG and LG series listed on Bradford White's service manual 238-51542-00. The green or colored status light means different things depending on which of three gas controls is fitted: the White Rodgers electronic control, the ICON System V1 or the ICON System V2. Identify your control first, because the same flash count does not mean the same thing on all three.
On the covered Bradford White gas water heater, 1 flash then pause (ICON V1) means ICON System V1 control: normal operation. Either the gas control is powered and waiting for the set-point knob to be turned to a water temperature, or the water heater is satisfied and operating normally. If the knob is in the PILOT position and pilot flame is detected, turn the knob to the desired setting. First, check that the temperature knob is not left in the PILOT position.
Common questions about “Bradford White gas water heater code 1 flash then pause (ICON V1)”
What does 1 flash then pause (ICON V1) mean on a Bradford White gas water heater?+
ICON System V1 control: normal operation. Either the gas control is powered and waiting for the set-point knob to be turned to a water temperature, or the water heater is satisfied and operating normally. If the knob is in the PILOT position and pilot flame is detected, turn the knob to the desired setting.