Direct answer
On the covered Frigidaire dishwasher, i20 means frigidaire states i20 means the unit did not drain completely. First, frigidaire's first check: confirm the knockout plug in the disposer has been removed.
Definition versus diagnosis
The display names a detected condition—not an automatically failed part.
What this covers
- Frigidaire dishwasher covered by the cited source
- Displayed code or documented alias: i20
- The exact operating state described by the manufacturer
What it does not cover
- ×Another product type or original-manufacturer platform
- ×A visually similar but different code
- ×Internal live electrical, sealed-system, gas, battery-cell or control-board repair
Match every character and the exact product
ReversiblePhotograph the complete display and product label. This record covers i20 on Frigidaire dishwashers. Several displays Frigidaire lists here are NOT faults — a delay countdown, minutes remaining, heat delay and PRESS START are normal operation. Availability varies by model.
Preserve the failure state
ReversibleFrigidaire's first check: confirm the knockout plug in the disposer has been removed. Record the operating stage, recent change and what still works before clearing the message.
Correct only the documented fault domain
ReversibleFrigidaire's own list: check the drain hose is not blocked, pinched or restricted, is at least 32 inches from the floor, and that filters and sump are clear of food soils. Reset by pressing Cancel, turning off the breaker, or unplugging for 3 minutes. Do not borrow a reset or meaning from a similar code, product or model year.
Verify once, then respect the service boundary
ReversibleRepeat only the shortest safe action that reaches the original stage. If i20 returns, stop repeated resets and use model-specific manufacturer support.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Exact questions
Common follow-ups
What does i20 mean on a Frigidaire dishwasher?+
Frigidaire states i20 means the unit did not drain completely.
Can I reset i20 without fixing the cause?+
A reset may hide the display temporarily but does not correct the documented fault. Record the code and complete only the safe checks first.
Why is the complete model number required?+
Manufacturers reuse characters across platforms. The model number determines which official table, controls and service boundary apply.
When should I stop?+
Stop for smoke, arcing, burning odor, uncontrolled water, gas odor, battery swelling, extreme heat or any condition the manufacturer directs to professional service.
Answer for the exact device and software version shown above.