Direct answer
On the covered KitchenAid range, FC E1, FC E2 and FC E3 mean there is no link between the the Wi-Fi Module and the wireless router — KitchenAid's own wording. First, reset power to the product: The appliance could not connect to the router.
Definition versus diagnosis
The display names a detected condition—not an automatically failed part.
What this covers
- KitchenAid range covered by the cited source
- Displayed code or documented alias: FC E1, FC E2 and FC E3
- The exact operating state described by the manufacturer
What it does not cover
- ×Another product type or original-manufacturer platform
- ×A visually similar but different code
- ×Internal live electrical, sealed-system, gas, battery-cell or control-board repair
Match every character and the exact product
ReversiblePhotograph the complete display and product label. This record covers FC E1, FC E2 and FC E3 on KitchenAid freestanding and slide-in ranges with electronic controls. Ranges and wall ovens do NOT share a code set — check which appliance you have before matching a code. Availability varies by model and by whether the range is electric, gas or dual-fuel. This is a cooking appliance: if you smell gas, do not operate any switch — leave and call the gas supplier from outside.
Preserve the failure state
ReversibleReset power to the product: The appliance could not connect to the router. Record the operating stage, recent change and what still works before clearing the message.
Correct only the documented fault domain
ReversibleFollow KitchenAid's documented step; arrange service if the display returns. KitchenAid documents these checks for this code: re-set your wireless router; and does another Wi-Fi capable device operate correctly. Work them in that order and correct only what you actually find.
Verify once, then respect the service boundary
ReversibleRepeat only the shortest safe action that reaches the original stage. KitchenAid specifies a 1 minute power interruption for this code, not an arbitrary one. If FC E1, FC E2 and FC E3 returns, stop repeated resets and use model-specific manufacturer support.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
KitchenAid's own page for this code, read 2026-08-20.
KitchenAid's own page for this code, read 2026-08-20.
KitchenAid's own page for this code, read 2026-08-20.
Exact questions
Common follow-ups
What does FC E1, FC E2 and FC E3 mean on a KitchenAid range?+
there is no link between the the Wi-Fi Module and the wireless router — KitchenAid's own wording.
Can I reset FC E1, FC E2 and FC E3 without fixing the cause?+
A reset may hide the display temporarily but does not correct the documented fault. Record the code and complete only the safe checks first.
Why is the complete model number required?+
Manufacturers reuse characters across platforms. The model number determines which official table, controls and service boundary apply.
When should I stop?+
Stop for smoke, arcing, burning odor, uncontrolled water, gas odor, battery swelling, extreme heat or any condition the manufacturer directs to professional service.
Answer for the exact device and software version shown above.