LG dishwasher · exact code

LG dishwasher code nE: meaning and safe checks

nE means: a vario pump issue — LG states the impeller is not spinning normally. Scope: LG dishwashers. F31, F35 and F37 apply only to models with Dynamic Heat Dry or Auto Open Door; CL and PF are indicators rather than faults.

On the covered LG dishwasher platform, nE means a vario pump issue — LG states the impeller is not spinning normally. First, check whether dishes are touching the impeller. LG says nE may occur when dishes touch the impeller; reorganize them and restart.

Differential

Likely causes of “LG dishwasher code nE”, and how to tell them apart

  1. 1

    Dishes touching the impeller

    What separates it A dish or utensil hangs low near the base

    How to confirm LG says nE may occur when dishes touch the impeller; reorganize them and restart

  2. 2

    An impeller that does not spin normally

    What separates it The load is clear and nE persists, which points to an impeller that does not spin normally

    How to confirm LG says if the error persists, inspection by a service technician is necessary

  3. 3

    Food debris jammed near the wash impeller

    What separates it nE returns even after the dishes are rearranged and the filter looks packed with debris

    How to confirm With the power off, remove and rinse the filter and check the area under it for debris

Before you touch a setting

Record this first — changing settings destroys the evidence

  • The exact characters shown on the display: nE
  • Whether anything hangs low near the base
  • Whether it happens on an empty run

Try in this order

0 of 5 completed
  1. What to do first

    Reversible

    Check whether dishes are touching the impeller.

  2. Correct only the documented fault domain

    Reversible

    Reorganise the dishes so nothing fouls the impeller and restart the dishwasher.

  3. Reload the dishes

    Reversible

    Reorganize the dishes so nothing fouls the impeller, keeping items clear of the base.

  4. Restart the dishwasher

    Reversible

    Start a cycle again with the reorganized load.

  5. Request service

    Reversible

    If the error persists, LG says inspection by a service technician is necessary.

Model-specific

What is true of this model and not of its siblings

Displayed as
nE.
Parts named
Impeller; vario pump.

Stop boundary

When this stops being a self-service repair

  • !Unplug the dishwasher before you reach into the base

Evidence ledger

Sources behind this answer

Where the manufacturer's article stops. LG's guide is the only source for nE.

Exact questions

Common questions

What does nE mean on a LG dishwasher?+

a vario pump issue — LG states the impeller is not spinning normally.

Can a dish cause it?+

Yes; dishes touching the impeller can.

Should I clean the filter for nE?+

Yes; a packed filter and debris beneath it can hold the impeller back, and it costs nothing to check before service.

Wrong device or version?

Match the path before repeating the steps.

Match another device