Direct answer
On the covered LG top-load washer platform, vS, uS, u5 means a contact issue with the vibration sensor, or a sensor malfunction — LG's own wording. LG notes the code can appear as u5 or uS. First, press the Start/Pause button.
Definition versus diagnosis
The display names a detected condition—not an automatically failed part.
What this covers
- LG top-load washer models covered by the cited manufacturer code family
- Displayed code or documented alias: vS, uS, u5
- The operating stage and conditions described by the source
What it does not cover
- ×Another appliance type or original-manufacturer platform
- ×A code that merely resembles these characters
- ×Internal live electrical, gas, sealed-system or control-board repair
Verify the exact code and model
ReversiblePhotograph the complete display and model label. Code aliases in this record: vS, uS, u5. LG top-load washers. LG publishes this list separately from its front-load list, and several codes mean different things across the two — dL and E3 appear only here, and AE means a rotation fault here where the front-load list defines AE as a leak.
Perform the first non-destructive check
ReversiblePress the Start/Pause button. Do not clear the display before recording the operating stage and remaining water, heat or load state.
Correct only the documented fault domain
ReversibleIf the error persists, press Power to turn the washer off, then restart it. Do not substitute a similar brand or product code table for the exact model manual.
Verify or escalate
ReversibleRun only a safe short test that reaches the original stage. If vS, uS, u5 returns, stop repeated resets and use model-specific manufacturer service.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Exact questions
Common follow-ups
What does vS, uS, u5 mean on a LG top-load washer?+
a contact issue with the vibration sensor, or a sensor malfunction — LG's own wording. LG notes the code can appear as u5 or uS.
Can I reset vS, uS, u5 without fixing the cause?+
A reset may clear the display temporarily but does not correct the documented fault domain. Record the code and complete the safe checks first.
Why do I need the complete model number?+
Manufacturers reuse characters across different controls and product platforms. The full model identifies which official code table and service data applies.
When should I stop troubleshooting?+
LG directs a persisting vS to service for the vibration sensor.
Answer for the exact device and software version shown above.