Direct answer
For the NETGEAR Nighthawk CAX80 cable modem router, local service, firewall, reserved IP, double NAT, CGNAT and provider blocks should be proved in order. First, verify the service locally and reserve its internal IP.
What this covers
- NETGEAR Nighthawk CAX80 cable modem router (CAX80)
- Cable-modem router; provider provisioning and DOCSIS signal precede router-only troubleshooting.
- The specific fault this record addresses: port forwarding is not working
What it does not cover
- ×The same symptom on a different NETGEAR product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
The forwarding rule points at the wrong address or port
What separates it The rule exists but the service is unreachable from outside.
How to confirm Confirm the rule's internal IP matches the device's current address and the port/protocol matches the service; a device whose IP changed by DHCP breaks a rule pinned to the old address, so reserve its IP.
- 2
The internal service is not actually listening or is firewalled
What separates it The rule is correct but the device refuses the connection even on the local network.
How to confirm Test the service from inside the LAN first; if it fails locally, the forward is not the problem — the service or the device's own firewall is.
- 3
A double NAT is swallowing the forward
What separates it The rule is on your router but your router's WAN is a private address.
How to confirm Cross-check double NAT; with two NAT layers the forward has to exist on the outer router too, or the layers must be collapsed.
- 4
Carrier-grade NAT makes inbound forwarding impossible
What separates it Everything is correct but no inbound connection ever arrives, and the provider shares one public IP across many customers.
How to confirm Ask the provider whether the line is behind carrier-grade NAT; if so, no port forward can work without a public IP or the provider's own solution.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- The rule's internal IP/port/protocol and whether the device's IP is reserved.
- Whether the service is reachable from inside the LAN at all.
- Your router's WAN IP — public, private (double NAT), or a shared carrier-grade range.
Verify the rule targets the device's current, reserved IP and correct port
ReversibleA DHCP address change silently breaks a rule pinned to the old one.
Confirm the service is listening by testing it from inside the LAN
ReversibleA service that fails locally will never work forwarded.
Check for a double NAT above your router
ReversibleA private WAN IP means the forward must exist on the outer router too.
Ask the provider about carrier-grade NAT if nothing inbound arrives
ReversibleCGNAT makes inbound forwarding impossible without a public IP.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- CAX80. Cable-modem router; provider provisioning and DOCSIS signal precede router-only troubleshooting.
- Cable MODEM-ROUTER combo (DOCSIS 3.1 + Wi-Fi 6)
- This is a combined cable MODEM and Wi-Fi 6 router in one — it plugs into the coax line and replaces the cable company's rented modem AND router. So 'no internet' can be the DOCSIS/cable side (provider provisioning, coax signal) as well as the router side, and it must be activated with your cable provider.
- Provider activation required
- A new CAX80 must be registered/activated with the cable provider (they link its identifiers to your account) before it gets internet — a very common 'new modem, no internet' cause. The coax signal lights must be solid.
- Wi-Fi 6 dual-band
- 2.4/5 GHz Wi-Fi 6 (no 6 GHz). Managed by the Nighthawk app or web admin.
- Symptom boundary
- This record covers NETGEAR Nighthawk CAX80 cable modem router when it port forwarding is not working. A different symptom on the same hardware, or this symptom on a different NETGEAR product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Forward only the specific ports a service needs, never a wide range or the DMZ, and never expose an admin interface — an over-broad forward is a direct security hole.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. NETGEAR Support publishes this as "Home networking support". Official NETGEAR router, Orbi, modem, switch and extender support. What that article does not carry is the model boundary — it is written for a product line, and CAX80 is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
My new Netgear CAX80 has no internet.+
Because it is a combined cable modem and router, the CAX80 must be activated with your cable provider — they have to register its modem identifiers to your account before it will get service, and skipping this is the top cause of 'new device, no internet'. Call the provider (or use their self-activation) with the modem's details. Also confirm the coax cable is tight and the modem's downstream/upstream and online lights go solid; a light that will not lock is a cable-signal/provisioning issue on the provider side.
I set up port forwarding but it still doesn't work.+
Work through it in order. Confirm the rule points at the device's current IP (reserve that IP so DHCP cannot change it) and the right port and protocol. Then test the service from inside your own network — if it fails there, the forward is not the issue. Then check whether your router's WAN IP is private (a double NAT that also needs the rule on the outer router) or a shared carrier-grade address, which makes inbound forwarding impossible without the provider's help.
Does this answer apply to every NETGEAR model?+
No. It is scoped to CAX80. Cable-modem router; provider provisioning and DOCSIS signal precede router-only troubleshooting.
What should I record before troubleshooting port forwarding or open port?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing port forwarding, open port. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Never expose insecure admin, camera or remote-desktop services.
Answer for the exact device and software version shown above.