Direct answer
For the Canon imageCLASS MF455dw, supply installation/venting, protective seals, nozzle/printhead output and driver document content should be separated. First, print the internal quality/nozzle page.
What this covers
- Canon imageCLASS MF455dw (5161C005)
- Canon printer; PIXMA/MegaTank/MAXIFY/imageCLASS ink/toner systems and maintenance paths differ.
- The specific fault this record addresses: prints blank pages
What it does not cover
- ×The same symptom on a different Canon product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
Protective tape or packaging was left on a new cartridge
What separates it Blank pages immediately after installing a new cartridge or setting up a new printer.
How to confirm New cartridges ship with sealing tape or a clip that must be removed. This is one of the most common causes on a new installation and is entirely reversible.
- 2
The cartridge is empty or not seated
What separates it Blank pages with a low-supply message, or after a cartridge change.
How to confirm Reseat the cartridge until it clicks positively. A cartridge that is in but not latched behaves as if absent.
- 3
The document itself is blank or the wrong page range was sent
What separates it One document prints blank while others are fine.
How to confirm Print the printer's own internal test page. If that prints correctly, the printer is fine and the problem is in the document or the application.
- 4
Multiple sheets fed through together
What separates it One blank page alongside a correct one, with a full or fanned-out paper tray.
How to confirm Fan the stack and reload it squarely. Sheets sticking together pass through unmarked.
- 5
The wrong printer or a print-to-file driver was selected
What separates it Nothing appears at all, or blank output, with several printers installed.
How to confirm Check which device the job was actually sent to.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- Whether the printer's own internal test page also comes out blank — this separates the printer from the computer in one step.
- Whether a cartridge was changed or the printer newly set up immediately beforehand.
- Whether every document is blank or only one.
- What the nozzle check produces, on an inkjet.
Print the printer's own internal test page from its control panel
ReversibleA correct test page proves the printer works and moves the problem entirely to the computer or the document.
Check for protective tape or a clip left on a newly installed cartridge
ReversibleThis is the single most common cause of blank pages on a new printer or after a cartridge change.
Reseat every cartridge until it latches positively
ReversibleA cartridge that is inserted but not clicked home behaves exactly as if it were absent.
Fan the paper stack and reload it squarely
ReversibleSheets stuck together pass through unmarked and produce a blank page alongside a correct one.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- 5161C005. Canon printer; PIXMA/MegaTank/MAXIFY/imageCLASS ink/toner systems and maintenance paths differ.
- Type — MONOCHROME LASER all-in-one (toner)
- A black-and-white laser AIO (scan/copy/fax, duplex, wireless) — prints only in BLACK by design, for fast, low-cost text. Laser uses toner and does not clog from disuse.
- Toner & drum
- Faded print is low/unseated toner; streaks/repeating marks are toner or drum. No colour because it is a mono printer.
- Connectivity
- Wi-Fi/Ethernet/USB; 'offline' is usually a network/queue issue.
- Symptom boundary
- This record covers Canon imageCLASS MF455dw when it prints blank pages. A different symptom on the same hardware, or this symptom on a different Canon product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Stop for toner spilling inside the printer, and clean it with a damp cloth rather than a household vacuum.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. Canon publishes this as "Blank pages on prints and copies (MF8080/MF8380)". Covers pages coming out blank on both prints and copies, which separates a print-path fault from a scan-path fault. Probed 2026-08-21: title-verified. What that article does not carry is the model boundary — it is written for a product line, and 5161C005 is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
My Canon imageCLASS MF455dw won't print colour documents in colour.+
It cannot — the MF455dw is a monochrome (black-and-white) laser, so it prints everything in black/greyscale by design; there is no colour toner. That is not a fault or a setting. If you need colour, a colour laser (like the MF656Cdw) or a colour inkjet is required. For high-volume, low-cost black text and documents, the mono laser is fast and economical.
I just installed a new cartridge and now everything prints blank.+
Take the cartridge back out and check for protective tape, a plastic clip or a sealing strip that was not removed. New cartridges ship with sealing that has to come off, and missing it is by far the most common cause of blank pages right after a change. Then reseat the cartridge until it clicks positively home.
How do I know if it's the printer or my computer?+
Print the printer's own internal test page from its control panel — that bypasses the computer entirely. If the test page prints correctly, the printer, its cartridges and its paper path are all working, and the problem is in the document, the driver or which printer the job was sent to.
Does this answer apply to every Canon model?+
No. It is scoped to 5161C005. Canon printer; PIXMA/MegaTank/MAXIFY/imageCLASS ink/toner systems and maintenance paths differ.
What should I record before troubleshooting blank pages or no ink?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing blank pages, no ink. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Avoid repeated deep cleanings that waste ink or overheat components.
Answer for the exact device and software version shown above.