Direct answer
For the Canon MegaTank PIXMA G7020, internal output, one color-management owner, paper/ink profile and supply state should be controlled. First, print the internal color quality page.
What this covers
- Canon MegaTank PIXMA G7020 (3114C002)
- Canon printer; PIXMA/MegaTank/MAXIFY/imageCLASS ink/toner systems and maintenance paths differ.
- The specific fault this record addresses: prints the wrong colors
What it does not cover
- ×The same symptom on a different Canon product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
One colour is not printing at all
What separates it A consistent cast across everything — greens where reds should be, or a heavy blue tint.
How to confirm Print the nozzle check. A missing colour channel produces a predictable, uniform cast that identifies itself immediately.
- 2
Colour is being managed twice
What separates it Oversaturated or oddly shifted colour from a design or photo application, while ordinary documents look correct.
How to confirm Either the application or the printer driver should manage colour, not both. Double management is a classic cause and is fixed by choosing one owner.
- 3
The paper type setting does not match the media
What separates it Dull or oversaturated colour on photo paper.
How to confirm The setting selects the ink volume and colour profile. Photo paper printed with a plain-paper setting looks flat and wrong.
- 4
Third-party or refilled ink does not match the profile
What separates it Colour shifted since switching supplies.
How to confirm Printer colour profiles are built for the manufacturer's own ink formulation, and third-party ink can differ enough to shift colour noticeably.
- 5
The printer needs alignment or calibration
What separates it Colour fringing on edges, or misregistration between colours.
How to confirm Run the printer's own alignment or calibration routine, which exists for exactly this.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- The nozzle check or a colour test page, which shows whether every channel is actually printing.
- Whether the cast is uniform, which points at a missing channel, or content-dependent, which points at colour management.
- Whether it happens from every application or only one.
- Whether the ink or toner supplies are genuine.
Print the nozzle check or colour test page
ReversibleA missing channel produces a predictable uniform cast and identifies itself in one page.
Reseat every cartridge until it latches and check each level
ReversibleA supply that is in but not latched behaves as if it were empty.
Choose one owner for colour management — the application or the driver, not both
ReversibleDouble colour management is a classic cause of oversaturated, shifted output from design applications.
Match the paper type setting to the media
ReversibleIt selects both ink volume and colour profile; photo paper on a plain-paper setting looks flat and wrong.
Run the printer's alignment or calibration routine
ReversibleThis is what it exists for, and it addresses fringing and misregistration.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- 3114C002. Canon printer; PIXMA/MegaTank/MAXIFY/imageCLASS ink/toner systems and maintenance paths differ.
- Type — refillable INK TANK all-in-one (MegaTank)
- A cartridge-free MegaTank inkjet AIO — refill large ink BOTTLES into onboard tanks for very low cost per page and thousands of pages. Still inkjet, so the printhead can CLOG if unused; the savings are from bottle refills, not clog-immunity.
- Initial charging & refills
- First setup charges the printhead using some starter ink (normal). Refill the matching bottle when low; do not run tanks dry, which introduces air and causes clogs. Fax/ADF on this model (office AIO).
- Connectivity
- Wi-Fi/Ethernet/USB via the Canon app; 'offline' is usually a Wi-Fi drop or wrong queue.
- Symptom boundary
- This record covers Canon MegaTank PIXMA G7020 when it prints the wrong colors. A different symptom on the same hardware, or this symptom on a different Canon product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Do not recalibrate or replace hardware when the printer's own internal test page is accurate — that proves the printer is fine and the problem is upstream in the driver or application.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. Canon publishes this as "No Printing Results / Printing Is Blurred / Colors Are Wrong / White Streaks - iP7220". Canon's wrong-colour path: nozzle check, head cleaning and alignment, plus driver colour settings. Probed 2026-08-21: title-verified. What that article does not carry is the model boundary — it is written for a product line, and 3114C002 is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
My Canon MegaTank G7020 prints faded even with ink in the tanks.+
MegaTank is still inkjet, so faded/streaked output with full tanks is a printhead clog — run the nozzle check, then Cleaning and Deep Cleaning from the menu/software, checking the pattern after each. Make sure the tanks were not run dry (air in the lines causes clogs) and the ink stopper/vent is set per the setup guide. A stubborn clog may need several cleans or a print-head soak. The tank system saves money but does not prevent clogs, so print regularly.
Everything prints with a strong colour cast.+
Print the nozzle check first. A uniform cast across all content almost always means one colour channel is not printing at all, and the nozzle check shows exactly which — that turns a vague colour complaint into a specific, fixable one on a single page.
Colours look wrong from Photoshop but fine from Word.+
That is double colour management. Both the application and the printer driver are converting the colours, and the conversions compound. Choose one to manage colour and set the other to leave it alone — either application-managed with the driver's colour adjustment off, or printer-managed with the application not converting.
Does this answer apply to every Canon model?+
No. It is scoped to 3114C002. Canon printer; PIXMA/MegaTank/MAXIFY/imageCLASS ink/toner systems and maintenance paths differ.
What should I record before troubleshooting wrong colors or color cast?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing wrong colors, color cast. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Do not recalibrate hardware when the internal page is accurate.
Answer for the exact device and software version shown above.