Direct answer
For the Canon PIXMA TS6420a, printer error state, local engine, connection, queue, driver and document should be separated. First, print an internal test and inspect the panel message.
What this covers
- Canon PIXMA TS6420a (4462C082)
- Canon printer; PIXMA/MegaTank/MAXIFY/imageCLASS ink/toner systems and maintenance paths differ.
- The specific fault this record addresses: receives jobs but does not print
What it does not cover
- ×The same symptom on a different Canon product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
A stuck job is blocking the queue
What separates it Jobs accumulate and none print, with the first one refusing to cancel.
How to confirm Clear the queue and restart the print spooler if jobs will not delete. A single corrupt job blocks everything behind it indefinitely.
- 2
The printer is offline or unreachable
What separates it The queue shows offline or an error.
How to confirm See offline — a changed IP address is the most common underlying cause.
- 3
The job went to a different printer
What separates it Nothing appears, with several printers or a print-to-PDF option installed.
How to confirm Check which device the job was actually sent to, particularly where a default was changed.
- 4
The printer is waiting for something
What separates it The job is received but nothing prints, with a message on the printer's own display.
How to confirm Read the printer's display. It is frequently waiting for paper, a closed door, an acknowledged supply message or a manual feed, and none of that is visible from the computer.
- 5
The driver is wrong or corrupted
What separates it Errors on printing, or garbled output rather than nothing.
How to confirm Reinstall the driver for the exact model, since a driver for a similar model can install and then fail.
- 6
A supply is exhausted and the printer has stopped
What separates it Printing stopped with a supply message showing.
How to confirm Some printers stop entirely rather than continuing in black only.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- Whether the printer can print its own test page from its control panel.
- Any message on the printer's own display, which is frequently the whole answer and is invisible from the computer.
- Whether the job appears in the queue and stays, or never arrives.
- Which printer the job was actually sent to.
Read the printer's own display before anything else
ReversibleIt is often waiting for paper, a closed door, or an acknowledged message, and none of that shows on the computer.
Print the printer's internal test page
ReversibleA working test page proves the printer and moves the problem to the network, queue or computer.
Clear the print queue and restart the print spooler
ReversibleOne corrupt job blocks everything behind it and often cannot be cancelled normally.
Confirm which printer the job was sent to
ReversibleA changed default, or a print-to-PDF entry, silently swallows jobs.
Reinstall the driver for the exact model
ReversibleA driver for a similar model will install and then fail in ways that look like a printer fault.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- 4462C082. Canon printer; PIXMA/MegaTank/MAXIFY/imageCLASS ink/toner systems and maintenance paths differ.
- Type — compact home INKJET all-in-one
- A compact PIXMA inkjet AIO for everyday home use. Inkjet printheads CLOG if unused — faded/streaked output is usually a clog; run nozzle check and cleaning. Print regularly.
- Cartridges
- Uses a small set of Canon cartridges; low/empty or untaped-new cartridges cause missing output. Reseat and remove tape on new ones.
- Connectivity
- Wi-Fi/USB via the Canon app; 'offline' is usually a Wi-Fi drop or wrong queue.
- Symptom boundary
- This record covers Canon PIXMA TS6420a when it receives jobs but does not print. A different symptom on the same hardware, or this symptom on a different Canon product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Only install drivers from the manufacturer's own site; bundled driver utilities from third-party sites are a common malware vector.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. Canon publishes this as "Printing Does Not Start MX432". Canon's article for a job that is accepted but never starts printing - queue, port, cancel-and-resend, ink status. Probed 2026-08-21: title-verified. What that article does not carry is the model boundary — it is written for a product line, and 4462C082 is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
My Canon PIXMA TS6420a says a cartridge is empty right after I installed it.+
First confirm the orange protective tape and cap were fully removed from the new cartridge and it clicked into place. A brand-new cartridge read as empty can also be a contact issue — remove and reseat it, wiping the contacts gently. If you refilled or used a third-party cartridge, the printer may not read its level (or may reject it). Genuine, properly-seated Canon cartridges resolve most 'empty when new' errors; a nozzle check confirms it is actually printing.
I hit print and nothing happens at all.+
Look at the printer's own display first — it is very often waiting for something specific, like paper in a tray, a door that is not fully closed, or a supply message that needs acknowledging, and none of that is visible from your computer. After that, clear the print queue, because one stuck job blocks every job behind it and frequently cannot be cancelled normally.
Does this answer apply to every Canon model?+
No. It is scoped to 4462C082. Canon printer; PIXMA/MegaTank/MAXIFY/imageCLASS ink/toner systems and maintenance paths differ.
What should I record before troubleshooting not printing or stuck queue?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing not printing, stuck queue. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Preserve unsaved documents and do not clear enterprise queues without authorization.
Answer for the exact device and software version shown above.