Direct answer
A failure immediately after a known change should be checked for new defaults, stale pairing, power sequencing or compatibility before factory recovery. For automatic duplex paper path, first print the internal duplex test on fresh supported plain paper.
What this covers
- automatic duplex paper path with this exact failure state
- Diagnosis across mechanical duplexer versus driver binding edge, paper weight and curl
- Customer-accessible observation, settings and external components
What it does not cover
- ×A displayed manufacturer error code with a different documented meaning
- ×Live electrical, sealed-system, internal battery-cell or gas repair
- ×A claim that every model exposes identical controls
Capture the exact failure state
ReversibleRecord the change, version, outage time or newly connected hardware and the last known working state. Expected behavior: reverse and feed the first side without a jam, skew or upside-down layout.
Isolate the component boundary
ReversiblePrint the internal duplex test on fresh supported plain paper. Remove or roll back only the reversible change, or test the previous direct path. Boundary to separate: mechanical duplexer versus driver binding edge, paper weight and curl.
Correct only the proven cause
ReversibleReseat the duplexer, correct media and choose long- or short-edge binding. Reapply compatible settings, update both endpoints or replace the incompatible new path.
Verify and stop safely
ReversibleRestart twice and confirm the feature remains stable with the intended change present. Do not reach into hot laser areas or force jammed gears.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Exact questions
Common follow-ups
What should I check first when automatic duplex paper path has this problem?+
Print the internal duplex test on fresh supported plain paper.
Why not factory-reset immediately?+
The useful boundary is mechanical duplexer versus driver binding edge, paper weight and curl. A reset can erase state without proving which side failed.
When should I stop troubleshooting?+
do not reach into hot laser areas or force jammed gears.
Answer for the exact device and software version shown above.