Direct answer
A printer problem limited to one sender, document, tray or media type should be repaired at that boundary, not with a factory reset. For automatic duplex paper path, first print the internal duplex test on fresh supported plain paper.
What this covers
- automatic duplex paper path with this exact failure state
- Diagnosis across mechanical duplexer versus driver binding edge, paper weight and curl
- Customer-accessible observation, settings and external components
What it does not cover
- ×A displayed manufacturer error code with a different documented meaning
- ×Live electrical, sealed-system, internal battery-cell or gas repair
- ×A claim that every model exposes identical controls
Capture the exact failure state
ReversibleName the failing sender, document, tray or paper type and one combination that still prints correctly. Expected behavior: reverse and feed the first side without a jam, skew or upside-down layout.
Isolate the component boundary
ReversiblePrint the internal duplex test on fresh supported plain paper. Change only the sender, job, tray, media or connection while keeping the printer state unchanged. Boundary to separate: mechanical duplexer versus driver binding edge, paper weight and curl.
Correct only the proven cause
ReversibleReseat the duplexer, correct media and choose long- or short-edge binding. Repair the isolated queue, document, tray setup, media selection or connection.
Verify and stop safely
ReversiblePrint the same controlled test from both the failing and known-working contexts. Do not reach into hot laser areas or force jammed gears.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Exact questions
Common follow-ups
What should I check first when automatic duplex paper path has this problem?+
Print the internal duplex test on fresh supported plain paper.
Why not factory-reset immediately?+
The useful boundary is mechanical duplexer versus driver binding edge, paper weight and curl. A reset can erase state without proving which side failed.
When should I stop troubleshooting?+
do not reach into hot laser areas or force jammed gears.
Answer for the exact device and software version shown above.