Direct answer
For the Bosch 800 Series SHX78CM5N dishwasher, control lock, wet panels, active cycles and door state can disable keys without a failed console. First, dry the panel and use the exact manual lock/unlock control.
What this covers
- Bosch 800 Series SHX78CM5N dishwasher (SHX78CM5N)
- Bosch dishwasher; exact model determines CrystalDry, PureDry, water softener and Home Connect equipment.
- The specific fault this record addresses: controls are locked or buttons do not respond
What it does not cover
- ×The same symptom on a different Bosch product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
Control lock was engaged accidentally while wiping the panel
What separates it A lock or padlock icon on the display, buttons that beep without responding, and the problem started right after the front was cleaned.
How to confirm Most machines engage the lock on a three-second press of a specific button. Wiping across the panel holds several buttons at once and frequently triggers it.
- 2
The panel is wet and registering phantom touches
What separates it Buttons respond erratically, or the machine acts as if a button is being held down, immediately after cleaning or a spill.
How to confirm Dry the panel completely and wait before retesting. Capacitive touch panels are particularly prone to this.
- 3
A cycle is running and the controls are locked out by design
What separates it Buttons do not respond, no lock icon shows, and a cycle is in progress.
How to confirm Many machines lock out cycle selection once a cycle has started. Cancel the cycle using the documented sequence rather than pressing buttons repeatedly.
- 4
The lock sequence being used is for a different model
What separates it Repeated attempts to clear the lock do nothing, using a sequence found for a similar machine.
How to confirm The button and hold duration differ between brands and between models within a brand — check the manual for this exact model.
- 5
A genuine keypad or control-board fault
What separates it No lock icon, dry panel, no cycle running, and specific keys or the whole panel are dead.
How to confirm This is the conclusion once lock state, moisture and an active cycle are all ruled out.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- Whether a lock or padlock icon is visible on the display — its presence settles the diagnosis immediately.
- Whether the panel was recently wiped or had liquid spilled on it.
- Whether a cycle is currently running.
- Whether all keys are dead or only some, which distinguishes a lock from a partial keypad failure.
Look for a lock or padlock icon on the display
ReversibleIts presence identifies control lock rather than a fault, and it is the fastest check available.
Dry the panel completely and wait before retesting
ReversibleA wet capacitive panel registers phantom touches and can appear locked.
Use the exact lock-clear sequence from this model's manual
ReversibleThe button and hold duration differ between brands and between models in the same range — a sequence from a similar machine will not work.
Cancel any running cycle using the documented sequence
ReversibleMany machines lock out selection while a cycle is in progress, by design.
Confirm normal button response and re-enable the lock once
ReversibleVerifies both directions of the control rather than just clearing it.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- SHX78CM5N. Bosch dishwasher; exact model determines CrystalDry, PureDry, water softener and Home Connect equipment.
- Drying — CrystalDry (zeolite)
- CrystalDry uses zeolite minerals to convert moisture to heat, drying plastics ~60% better than plain condensation — Bosch's best drying. No traditional exposed element.
- Rinse aid + quiet + 3rd rack
- Rinse aid still helps; flexible 3rd rack; around 42 dBA. A faint mineral smell from the zeolite early on is normal.
- Manual filter
- A manual filter must be rinsed periodically; a clog is the top cause of poor cleaning, odour and slow draining.
- Symptom boundary
- This record covers Bosch 800 Series SHX78CM5N dishwasher when it controls are locked or buttons do not respond. A different symptom on the same hardware, or this symptom on a different Bosch product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Unplug or switch off at the breaker for heat at the panel, swelling, arcing, or visible liquid behind the console.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. Bosch Home Appliances publishes this as "Owner support". Official Bosch appliance manuals, error-code help, cleaning and service entry point. What that article does not carry is the model boundary — it is written for a product line, and SHX78CM5N is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
My Bosch 800 dishwasher won't drain.+
Clean the filter first — a clogged manual filter is the top cause. Then check the drain hose is not kinked, the air gap (if fitted at the sink) is clear, and — if a garbage disposer was recently installed — that the disposer's knockout plug was removed, which is a very common cause of a dishwasher that suddenly will not drain after new plumbing. A small amount of clean water in the filter well is normal and not a drain fault.
The buttons stopped working right after I wiped the front.+
You almost certainly engaged control lock. Most machines turn it on when a specific button is held for about three seconds, and wiping a cloth across the panel holds several buttons at once. Look for a padlock icon on the display, then clear it with the sequence in the manual for this exact model — the button differs between brands.
I tried the unlock combination I found online and it did nothing.+
The button and the hold duration differ between brands and even between models in the same range, so a sequence from a similar machine will not work. Check the manual for this exact model number. Also confirm the panel is completely dry, since a wet touch panel can appear locked when it is not.
Does this answer apply to every Bosch model?+
No. It is scoped to SHX78CM5N. Bosch dishwasher; exact model determines CrystalDry, PureDry, water softener and Home Connect equipment.
What should I record before troubleshooting control lock or buttons?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing control lock, buttons. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Unplug for heat, swelling, arcing or liquid behind the console.
Answer for the exact device and software version shown above.