On the covered Amana dryer, F1 E1, F1 E3, F1 E4, F1 E5, F01 means the dryer's main control or user interface has reported a fault First, disconnect power for several minutes and reconnect it. Then: book service if the code returns straight away.
Differential
Likely causes of “Amana dryer code F1 E1, F1 E3, F1 E4, F1 E5, F01”, and how to tell them apart
- 1
The main control or the interface reported a fault
What separates it The display shows the code and the dryer will not run
How to confirm Unplug the dryer for several minutes, then plug it in
- 2
A voltage dip or surge
What separates it The code followed a storm or a trip
How to confirm Reset and test
- 3
A loose board connection
What separates it It appears after the dryer is moved
How to confirm Technician check
- 4
A failed board
What separates it It returns after every reset
How to confirm Service
- 5
An older F01
What separates it An earlier display
How to confirm Same steps
Before you touch a setting
Record this first — changing settings destroys the evidence
- The code
- Power cut or move beforehand
- Whether it returns
- Model number
Try in this order
0 of 8 completedWhat to do first
ReversibleDisconnect power for several minutes and reconnect it.
Correct only the documented fault domain
ReversibleBook service if the code returns straight away.
Unplug
ReversibleSeveral minutes.
Plug in
ReversibleAnd try a cycle.
Dry the panel
ReversibleIf it was wet.
Write the code
ReversibleAnd model number.
Book service
ReversibleIf it returns.
Do not run unattended
ReversibleWith a control fault.
Model-specific
What is true of this model and not of its siblings
- Part
- Main control and interface.
- Guidance
- Reset, then service.
Stop boundary
When this stops being a self-service repair
- !If the code returns, book Amana service
- !Do not open the console under power
- !Keep the dryer off
Evidence ledger
Sources behind this answer
Exact questions
Common questions
What does F1 E1, F1 E3, F1 E4, F1 E5, F01 mean on a Amana dryer?+
the dryer's main control or user interface has reported a fault
What does the control unit code mean on an Amana dryer?+
The main control or interface reported a fault, in the same family as F1 E1 and F01.
Will unplugging help?+
Sometimes.
Is it the lint?+
No, it is a control code.
Is service costly?+
Ask for a quote.
Can I keep using it?+
Not if it behaves oddly.
What do the control and the interface do?+
The control runs the cycle; the interface takes your key presses and drives the display.
Why does a reset sometimes work?+
A power glitch can leave the boards out of step, and a full power-off lets them restart together.
What if it returns at once?+
A board has failed and needs replacing.
What should I tell service?+
The model number, the exact code and any storm or move beforehand.
Can a wet panel cause the code?+
Yes, moisture on the keypad can disturb the interface, so dry the panel and leave the dryer unplugged until it is dry.
Why does the code show on a cold start?+
The boards check themselves when power returns, and a faulty one fails that check at once.
Is it ever a wiring fault?+
Sometimes a connector between the boards loosens after a move, which a technician reseats before replacing a board.
Does a storm cause it?+
A surge can upset the boards, and the code often follows a storm even when nothing else was damaged.
Should I try another outlet?+
It does no harm, but the code points to the dryer's own boards.
What should I avoid?+
Repeated power-cycling will not revive a failed board.
What helps the technician?+
Telling them the exact code, whether it came after a storm or a move, and whether the keys respond.
Is it safe to use the dryer after the code clears?+
If a reset clears it and the dryer runs normally, yes, but watch for the code returning, since a returning code means a failing board.
Can lint cause a control code?+
Not directly; a control code is about electronics, though a clogged vent can overheat a board and shorten its life, so keep the vent clear.
How do I find the model number?+
It is on a label inside the door frame or on the back, and service will ask for it.