On the covered Brother printer, TS-07 means the machine cannot detect a wireless access point or router that has WPS enabled. First, confirm how WPS is started on the router, then start the connection again. Then: Brother's first step is to print the WLAN Report, whose Connection line shows OK or Failed (Error: TS-XX). Brother says to connect with WPS you must operate both the machine and the router, so confirm the WPS connection method on the router and try again; if you do not know how to use WPS on the router, see its documentation, ask its maker or ask your network administrator.
Try in this order
0 of 4 completedWhat to do first
ReversibleConfirm how WPS is started on the router, then start the connection again.
Correct only the documented fault domain
ReversibleBrother's first step is to print the WLAN Report, whose Connection line shows OK or Failed (Error: TS-XX). Brother says to connect with WPS you must operate both the machine and the router, so confirm the WPS connection method on the router and try again; if you do not know how to use WPS on the router, see its documentation, ask its maker or ask your network administrator.
Confirm the router supports WPS
ReversibleTS-07 means the printer could not find a router with WPS or AOSS switched on. Check the router carries the WPS symbol, then start WPS on both the router and the printer within the time window.
Use the Network Connection Repair Tool
ReversibleIf the printer joined before but no longer prints, Brother's repair tool can find and update the printer's IP address in the driver.
Evidence ledger
Sources behind this answer
Exact questions
Common questions about “Brother printer code TS-07”
What does TS-07 mean on a Brother printer?+
The machine cannot detect a wireless access point or router that has WPS enabled.