On the covered LG range or oven, F56 means a Griddle Heating Error — LG's own wording. First, note whether the griddle warmed at all before the code. Then: for F56 LG's single step is the breaker off for 30 seconds and back on, with no CLEAR/OFF key involved — LG's own sequence.
Differential
Likely causes of “LG range or oven code F56”, and how to tell them apart
- 1
A griddle heating error
What separates it F56 shows and the griddle stays cold or heats weakly
How to confirm LG words F56 as a griddle heating error
- 2
A griddle plate that is not seated
What separates it The plate sits unevenly or is not connected
How to confirm Remove and refit it as the manual shows
- 3
Spilled food around the connection
What separates it Burnt residue near the contacts
How to confirm Wipe when cool and dry
- 4
A griddle element that has failed
What separates it The griddle never warms
How to confirm Service replacement
- 5
A control fault
What separates it The code returns with a clean, seated plate
How to confirm Service diagnosis
Before you touch a setting
Record this first — changing settings destroys the evidence
- That the code reads F56 and not F51 or F59
- Whether the griddle gets warm at all
- Whether the plate was removed and replaced recently
- Any spills near the griddle connection
Try in this order
0 of 6 completedWhat to do first
ReversibleNote whether the griddle warmed at all before the code.
Correct only the documented fault domain
ReversibleFor F56 LG's single step is the breaker off for 30 seconds and back on, with no CLEAR/OFF key involved — LG's own sequence.
Turn the griddle off
ReversibleAnd let it cool completely.
Remove the plate
ReversibleIf the manual allows.
Wipe the area and the connection
ReversibleWith a dry or barely damp cloth.
Refit the plate
ReversibleFirmly and level.
Model-specific
What is true of this model and not of its siblings
- What the griddle is
- Some LG ranges have a center griddle with its own element and sensor. The control watches the griddle's temperature against what it expects and shows F56 when the heating does not match.
- Seating matters
- A griddle plate that is not fully in place can sit off the connection or the sensor, which gives the control a reading it does not expect. Check that the plate is flat, undamaged and fitted as the manual says.
- Spills
- Grease and sugary spills bake onto a hot surface and can insulate the element or the sensor. Clean the griddle when it is cool, using the cleaner LG's manual allows.
- A related code
- F51 is the griddle sensor error and F59 the griddle not heating properly. A technician can tell them apart by reading the sensor, so give the exact code.
- When to stop
- If the griddle smells of burning, smokes or only some of it is hot, switch it off and let it cool, then book service.
- Records
- Write down how long the griddle took to warm before the code and whether it ever reached temperature, so the technician knows if the element or the sensor is suspect.
- Cleaning a griddle safely
- Wait until the griddle is fully cool, remove loose food, then wipe with a damp cloth and a mild cleaner the manual allows. Do not use abrasive pads on the coating, and do not immerse the griddle if it has a connector. Dry it before use. A clean, dry connection area is less likely to fault.
- Using the griddle after the code
- Do not switch the griddle on again until it has been checked, as an element that is partly failed may overheat in one area. Use the burners or the oven for cooking meanwhile.
Evidence ledger
Sources behind this answer
Exact questions
Common questions
What does F56 mean on a LG range or oven?+
a Griddle Heating Error — LG's own wording.
Can I cook on the cooktop?+
Usually yes, but check that the other zones work.
Is it safe to keep trying?+
No, stop if the griddle stays cold or smells hot.