Home Product SupportIdentify a code

LG washer · exact code

LG washer code vS, uS, u5: meaning and safe checks

vS, uS, u5 means: a potential issue with the vibration sensor — LG's own wording, from a contact problem or a sensor malfunction. LG notes vS may appear as u5 or uS on the display. Scope: LG front-load washers and washer-dryer combos. LG publishes a separate error-code list for top-load washers; codes such as Ed1–Ed5, dcL and OPn apply only to models with the ezDispense liquid dispenser.

Direct answer

On the covered LG washer platform, vS, uS, u5 means a potential issue with the vibration sensor — LG's own wording, from a contact problem or a sensor malfunction. LG notes vS may appear as u5 or uS on the display. First, the unit is paused; press start/stop to resume.

Definition versus diagnosis

The display names a detected condition—not an automatically failed part.

KnownThe exact manufacturer definition and operating state shown above.Not yet provenA replacement component, wiring fault or internal cause without controlled isolation.Next evidenceThe first safe observation or test in the ordered checklist below.

What this covers

  • LG washer models covered by the cited manufacturer code family
  • Displayed code or documented alias: vS, uS, u5
  • The operating stage and conditions described by the source

What it does not cover

  • ×Another appliance type or original-manufacturer platform
  • ×A code that merely resembles these characters
  • ×Internal live electrical, gas, sealed-system or control-board repair
Try in this order0 of 4 completed

  1. Verify the exact code and model

    Reversible

    Photograph the complete display and model label. Code aliases in this record: vS, uS, u5. LG front-load washers and washer-dryer combos. LG publishes a separate error-code list for top-load washers; codes such as Ed1–Ed5, dcL and OPn apply only to models with the ezDispense liquid dispenser.

  2. Perform the first non-destructive check

    Reversible

    The unit is paused; press start/stop to resume. Do not clear the display before recording the operating stage and remaining water, heat or load state.

  3. Correct only the documented fault domain

    Reversible

    If the error returns after resuming, turn the unit off and restart it. Do not substitute a similar brand or product code table for the exact model manual.

  4. Verify or escalate

    Reversible

    Run only a safe short test that reaches the original stage. If vS, uS, u5 returns, stop repeated resets and use model-specific manufacturer service.

Evidence ledger

Sources behind this answer

Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.

01
LG USA SupportLG Front Load Washer — Error Code List (New)

LG's own front-load washer error-code list, read in a rendered browser 2026-08-20; the article body is client-rendered and returns nothing on a plain fetch.

Exact questions

Common follow-ups

What does vS, uS, u5 mean on a LG washer?+

a potential issue with the vibration sensor — LG's own wording, from a contact problem or a sensor malfunction. LG notes vS may appear as u5 or uS on the display.

Can I reset vS, uS, u5 without fixing the cause?+

A reset may clear the display temporarily but does not correct the documented fault domain. Record the code and complete the safe checks first.

Why do I need the complete model number?+

Manufacturers reuse characters across different controls and product platforms. The full model identifies which official code table and service data applies.

When should I stop troubleshooting?+

LG directs a persisting vS to inspection of the vibration sensor.

Change recordAug. 17, 2026 — Published from the cited first-party LG code reference with explicit product scope and reset limits.
Report a correction
Wrong device or version?

Match the path before repeating the steps.

Match another device