Direct answer
On the covered Maytag range, Lock- Electric means Maytag documents this display without stating a cause for it. Treat any cause you find elsewhere as unverified. First, reset power to the product: Power unit down by turning off the circuit breaker(s) for one (1) minute, then power the unit up by turning the circuit breaker(s) on.
Definition versus diagnosis
The display names a detected condition—not an automatically failed part.
What this covers
- Maytag range covered by the cited source
- Displayed code or documented alias: Lock- Electric
- The exact operating state described by the manufacturer
What it does not cover
- ×Another product type or original-manufacturer platform
- ×A visually similar but different code
- ×Internal live electrical, sealed-system, gas, battery-cell or control-board repair
Match every character and the exact product
ReversiblePhotograph the complete display and product label. This record covers Lock- Electric on Maytag freestanding and slide-in ranges with electronic controls. Ranges and wall ovens do NOT share a code set — check which appliance you have before matching a code. Availability varies by model and by whether the range is electric, gas or dual-fuel. This is a cooking appliance: if you smell gas, do not operate any switch — leave and call the gas supplier from outside.
Preserve the failure state
ReversibleReset power to the product: Power unit down by turning off the circuit breaker(s) for one (1) minute, then power the unit up by turning the circuit breaker(s) on. Record the operating stage, recent change and what still works before clearing the message.
Correct only the documented fault domain
ReversibleFollow Maytag's documented step; arrange service if the display returns. Maytag documents one check for this code — the Control Lock avoids unintended use of the surface cooking areas — so confirm that before treating anything else as the cause.
Verify once, then respect the service boundary
ReversibleRepeat only the shortest safe action that reaches the original stage. Maytag specifies a 1 minute power interruption for this code, not an arbitrary one. If Lock- Electric returns, stop repeated resets and use model-specific manufacturer support.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Exact questions
Common follow-ups
What does Lock- Electric mean on a Maytag range?+
Maytag documents this display without stating a cause for it. Treat any cause you find elsewhere as unverified.
Can I reset Lock- Electric without fixing the cause?+
A reset may hide the display temporarily but does not correct the documented fault. Record the code and complete only the safe checks first.
Why is the complete model number required?+
Manufacturers reuse characters across platforms. The model number determines which official table, controls and service boundary apply.
When should I stop?+
Stop for smoke, arcing, burning odor, uncontrolled water, gas odor, battery swelling, extreme heat or any condition the manufacturer directs to professional service.
Answer for the exact device and software version shown above.