On the covered Samsung range or oven, bAd LinE means the electrical supply or terminal connection is incorrect. First, turn off the range at the breaker. Then: have a qualified electrician correct the supply/terminal connection. A tripped half of the double breaker, or a missing line at the wall plug, leaves the heating side unpowered.
Differential
Likely causes of “Samsung range or oven code bAd LinE”, and how to tell them apart
- 1
Only one of the two 120 volt lines reaching the range
What separates it The display lights but nothing heats; it runs on 120 volts instead of 240
How to confirm A tripped half of the double breaker, or a missing line at the wall plug, leaves the heating side unpowered
- 2
Crossed or loose wires at the back
What separates it A newly installed range shows the message at once
How to confirm The range's rear terminal block, reached through a small metal plate, should show the cord's wires firmly seated
Try in this order
0 of 5 completedWhat to do first
ReversibleTurn off the range at the breaker.
Correct only the documented fault domain
ReversibleHave a qualified electrician correct the supply/terminal connection.
Reset the double breaker
ReversibleTurn the breaker labeled Range fully off, then fully on.
Check the plug and outlet
ReversiblePush the plug fully into the outlet and have 240 volts confirmed at the outlet with a meter.
Call an electrician if new
ReversibleA new installation with the message is a wiring fault for an electrician, not a fault in the range.
Evidence ledger
Sources behind this answer
Exact questions
Common questions
What does bAd LinE mean on a Samsung range or oven?+
The electrical supply or terminal connection is incorrect.
Why does the clock work when the oven does not?+
The display and clock run on 120 volts. The oven and cooktop need both lines for 240 volts.