Direct answer
For the LG CX OLED TV, infrared power/volume and Bluetooth/RF navigation may be separate paths. First, replace/charge batteries and test close to an unobstructed receiver.
What this covers
- LG CX OLED TV (OLED48/55/65/77CX*)
- LG TV; OLED/QNED/LCD panel, webOS year, HDMI bandwidth and Magic Remote vary by model.
- The specific fault this record addresses: remote will not control the TV
What it does not cover
- ×The same symptom on a different LG product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
The batteries are weak
What separates it The remote works intermittently, at short range only, or needs button presses repeated.
How to confirm Weak batteries produce this long before they die completely. Replace both with fresh ones rather than testing with a mix.
- 2
The infrared emitter or receiver is obstructed
What separates it An infrared remote works only when pointed precisely, or not at all, with a soundbar or decorative item in front of the set's lower bezel.
How to confirm Point a phone camera at the remote's emitter and press a button — most phone cameras show the infrared LED as a faint purple flash, which proves the remote is transmitting.
- 3
A Bluetooth remote has lost its pairing
What separates it A voice or motion remote stops working entirely, while basic power and volume may still work if it also has infrared.
How to confirm Re-pair using the model's documented sequence, usually holding two specific buttons for several seconds while near the set.
- 4
The remote was dropped or has liquid damage
What separates it Specific buttons stop responding while others work.
How to confirm Individual dead buttons point at the remote's contacts rather than the pairing or the television.
- 5
The television has stopped responding to any input
What separates it Neither the remote nor the set's own physical buttons respond.
How to confirm If the set's own buttons also fail, the remote is not the problem. Unplug the set for 60 seconds — see power-restart.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- Whether the remote is infrared, Bluetooth, or both — this determines which tests apply at all.
- Whether a phone camera shows the infrared emitter flashing when a button is pressed.
- Whether the television's own physical buttons still work.
- Whether all buttons fail or only some.
Replace both batteries with fresh ones
ReversibleWeak batteries cause intermittent and short-range operation long before the remote dies completely.
Point a phone camera at the remote's emitter and press a button
ReversibleMost phone cameras render infrared as a faint purple flash, which proves the remote is transmitting.
Check that nothing blocks the set's infrared receiver
ReversibleA soundbar or ornament in front of the lower bezel is a very common cause.
Re-pair a Bluetooth or voice remote using the documented button sequence
ReversibleUsually two specific buttons held for several seconds while close to the set.
Test the television's own physical buttons
ReversibleIf they fail too, the remote is not the problem and the set itself needs a power cycle.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- OLED48/55/65/77CX*. LG TV; OLED/QNED/LCD panel, webOS year, HDMI bandwidth and Magic Remote vary by model.
- Panel
- 2020 OLED (WOLED, pre-evo) with the Alpha 9 Gen3 processor — self-emissive, perfect blacks, no backlight. On a panel this age, faint uniform near-black variation and normal ABL dimming are expected, not defects.
- Smart platform
- The older webOS (2020 platform) with the Magic Remote. This is the oldest LG TV in this library, and app support is the key issue: some streaming apps have dropped or no longer update on this webOS generation. Check the LG Content Store first; where an app is gone, an external streamer is the fix, not a TV repair.
- Gaming / HDMI
- Four HDMI 2.1 ports at 4K 120 Hz with VRR, ALLM and G-Sync — but at 40 Gbps, not the 48 Gbps of later models, so a few of the most demanding 4K 120 formats (e.g. 12-bit) are outside its bandwidth. That is a spec ceiling, not a fault.
- Symptom boundary
- This record covers LG CX OLED TV when it remote will not control the TV. A different symptom on the same hardware, or this symptom on a different LG product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Remove the batteries from a remote showing corrosion or leakage and do not handle the residue with bare hands.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. LG Support publishes this as "TV and home theater support". Official LG television manuals, webOS support, diagnostics and repair entry point. What that article does not carry is the model boundary — it is written for a product line, and OLED48/55/65/77CX* is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
My LG CX won't run a streaming app any more.+
The CX is a 2020 TV on an older webOS, and the most common cause is the app provider ending support for that webOS version. Check the LG Content Store for an update and cold-restart the TV. If the app has been withdrawn for this generation of webOS, it cannot be restored on the TV itself — an inexpensive external streaming stick brings it back, which is far cheaper than replacing a working panel.
Does the LG CX do 4K 120Hz for my PS5?+
Yes — the CX has four HDMI 2.1 ports with 4K 120 Hz, VRR and ALLM. They run at 40 Gbps rather than the 48 Gbps of newer LGs, so the very highest-bandwidth 4K 120 formats fall outside its range, but standard PS5 and Xbox Series X 4K 120 gaming works. Use a certified cable and turn on Game Optimizer.
How can I tell if the remote is actually sending anything?+
Point your phone's camera at the front of the remote and press a button while watching the screen. Most phone cameras can see infrared even though your eyes cannot, so you will see a faint purple flash from the emitter. If it flashes, the remote is transmitting and the problem is at the television's receiver or in its settings.
My voice remote stopped working but the power button still does.+
That combination points at lost Bluetooth pairing. Many voice remotes use infrared for basic power and volume and Bluetooth for everything else, so when the pairing drops you keep the basics and lose the rest. Re-pair it using the sequence in the manual, usually two buttons held together near the set.
Does this answer apply to every LG model?+
No. It is scoped to OLED48/55/65/77CX*. LG TV; OLED/QNED/LCD panel, webOS year, HDMI bandwidth and Magic Remote vary by model.
What should I record before troubleshooting remote not working or pairing?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing remote not working, pairing. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Stop for battery corrosion, swelling, heat or liquid damage.
Answer for the exact device and software version shown above.