Direct answer
For the Sony X900H 4K TV, console/game support, HDMI port bandwidth, cable, input mode and format must all align. First, connect the console directly to the labeled high-bandwidth port.
What this covers
- Sony X900H 4K TV (XBR-55/65/75/85X900H)
- Sony BRAVIA TV; Google TV/Android TV version, XR processor, panel and HDMI 2.1 ports vary.
- The specific fault this record addresses: game mode, 120 Hz or VRR is not working
What it does not cover
- ×The same symptom on a different Sony product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
The console is connected to a port that does not support the feature
What separates it VRR or 4K120 is unavailable, while the same console works normally at lower settings.
How to confirm Most televisions support their highest-bandwidth features on only some ports, and the manual states which. This is the most common cause.
- 2
The port's enhanced-format setting is not enabled
What separates it The console does not offer the higher modes at all.
How to confirm Many sets require an explicit per-port setting — named Enhanced, HDMI UHD Colour, Input Signal Plus or similar — before the port will negotiate full bandwidth.
- 3
The cable cannot carry the bandwidth
What separates it The mode enables and then drops out, or the picture blanks intermittently.
How to confirm See hdmi-no-signal. HDMI 2.1 features need substantially more bandwidth than 4K60.
- 4
Game mode is not selected
What separates it Input lag feels high even though VRR is active.
How to confirm Game mode bypasses most picture processing, and that processing is what causes the lag. Some sets switch automatically via ALLM; others require it to be selected manually per input.
- 5
A receiver or soundbar in the chain cannot pass the format
What separates it The feature works when the console is connected directly and not when routed through another device.
How to confirm The weakest device in the chain sets the ceiling for everything behind it.
- 6
VRR is causing visible brightness fluctuation
What separates it The feature works but produces flickering, worst in menus and loading screens.
How to confirm See flicker. This is a known characteristic of VRR on many panels at low frame rates rather than a fault.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- Which HDMI port the console is connected to, and whether the manual lists it as supporting the feature.
- Whether the port's enhanced-format setting is enabled.
- What the console reports it is actually outputting.
- Whether anything sits between the console and the television.
Move the console to a port the manual lists as supporting the feature
ReversibleMost sets support their highest-bandwidth features on only some ports, and this is the most common cause.
Enable the port's enhanced-format setting
ReversibleNamed Enhanced, HDMI UHD Colour or Input Signal Plus depending on brand; without it the port will not negotiate full bandwidth.
Confirm game mode is active for that input
ReversibleGame mode bypasses the picture processing that causes input lag, and some sets need it selected manually per input.
Connect the console directly, bypassing any receiver or soundbar
ReversibleThe weakest device in the chain limits the whole chain.
Check what the console reports it is outputting
ReversibleBoth ends have to agree, and the console's own display settings will show what it actually negotiated.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- XBR-55/65/75/85X900H. Sony BRAVIA TV; Google TV/Android TV version, XR processor, panel and HDMI 2.1 ports vary.
- Panel — full-array LED LCD
- 2020 full-array local-dimming LED LCD with the X1 Ultimate processor. A backlight with limited zones, so raised dark-room blacks and blooming are normal for the tier, not a fault.
- Smart platform — Android TV (older)
- This is the oldest Sony here and runs Android TV, the platform before Google TV. Update at Settings › Device Preferences › About › System update. On a 2020 Android TV, an app that stops working is often the provider ending support for that OS version — check the Play Store for an update before assuming a fault; a cheap external streamer restores anything withdrawn.
- Gaming / HDMI — 4K120 and VRR added by firmware
- Two HDMI 2.1 ports for 4K 120 Hz. Both 4K 120 Hz and VRR were enabled by later firmware updates — if they are missing, update the TV first (this set shipped before those features were switched on).
- Dolby Vision — yes
- Supports Dolby Vision, HDR10 and HLG — unlike Samsung.
- Symptom boundary
- This record covers Sony X900H 4K TV when it game mode, 120 Hz or VRR is not working. A different symptom on the same hardware, or this symptom on a different Sony product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Do not use HDMI splitters or switches in a VRR or 4K120 path unless they explicitly support HDMI 2.1 bandwidth — most silently downgrade it.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. Sony Support publishes this as "Television and computer support". Official Sony and BRAVIA manuals, firmware and troubleshooting support. What that article does not carry is the model boundary — it is written for a product line, and XBR-55/65/75/85X900H is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
My Sony X900H won't do 4K 120Hz or VRR.+
The X900H shipped in 2020 before those features were enabled and received them through firmware updates, so update the TV first: Settings › Device Preferences › About › System update. After updating, turn on the enhanced HDMI format for the port your console is in and enable VRR in the source. Both live on the two HDMI 2.1 ports; the older HDMI 2.0 ports cannot do them.
My console won't offer 4K120 or VRR on this TV.+
Check which port it is plugged into. Most televisions support their full HDMI 2.1 bandwidth on only some of their ports — often two of four — and the manual says which. After moving it, enable that port's enhanced-format setting, which brands call Enhanced, HDMI UHD Colour or Input Signal Plus; without it the port will not negotiate the higher modes at all.
VRR is on but the game still feels laggy.+
VRR and game mode are different things. VRR matches the refresh rate to the frame rate to remove tearing; game mode bypasses the television's picture processing, which is what actually causes input lag. Make sure game mode is active for that specific input — some sets switch automatically, others need it set manually per port.
Does this answer apply to every Sony model?+
No. It is scoped to XBR-55/65/75/85X900H. Sony BRAVIA TV; Google TV/Android TV version, XR processor, panel and HDMI 2.1 ports vary.
What should I record before troubleshooting game mode or 120 Hz or VRR?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing game mode, 120 Hz, VRR. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Stop for hot cables, port damage or persistent flicker in menus.
Answer for the exact device and software version shown above.