Exact model-family answer directory
Bosch 300 Series SHS43CF5N dishwasher troubleshooting
Bosch 300 Series SHS43CF5N dishwasher (SHS43CF5N): size and noise (from Bosch's spec sheet); home Connect; racks and sensors; pureDry and AquaStop; running cost and warranty; finding the data plate, and a fix for each symptom below.
- Size and noise (from Bosch's spec sheet)About 33 7/8 in high, 23 9/16 in wide and 23 11/16 in deep, at 48 dBA, with 16 place settings.
Confirm the model first
Which units this covers, and how to tell yours is one of them
- Model numbers and patterns
- SHS43CF5N
Published specification
What is true of this model and changes how you fix it
- Hardware — Bosch product page300 Series, PureDry condensation drying — same 300-series platform as the SHE53B75UC.
- Drying — PureDry condensation, NO heating elementNo heating element; condensation drying. Damp plastics are normal, not a fault.
- Rinse aid is essentialRinse aid drives drying — an empty tank is the top cause of wet dishes; keep it filled.
- Home ConnectWi-Fi with a Smart Cycle feature and voice control through Alexa or Google Home.
- Racks and sensorsEasyGlide racks on all three racks and PrecisionWash sensors that adjust the cycle to the wash water.
- PureDry and AquaStopA drying system safe for plastics on the bottom rack, and AquaStop leak protection that stops water intake and starts the drain if it detects a leak.
- Running cost and warranty3.5 gallons a cycle, 269 kWh a year and a 10-year rust-through warranty.
- Finding the data plateBosch dishwashers have a data plate on the inside edge of the door or on the tub frame with the model (SHS code) and the FD manufacturing number. Bosch service needs both, so note them. The plate is easy to read with the door open and the lower rack pulled out.
- Looking after the filterA Bosch dishwasher has a self-cleaning filter system, but you should still lift out the cylindrical filter and the flat mesh filter now and then and rinse them. A clean filter keeps the spray strong and avoids smells.
- Rinse aid and saltBosch recommends rinse aid for the best drying, and, in hard water, dishwasher salt for models with a water softener. The display shows a refill light. Keeping both topped up avoids white film on glasses.
- Cycles and dryingBosch dishwashers use a condensation drying method, which relies on the hot final rinse and on rinse aid, so dishes may feel slightly damp on plastics. Choose Auto for mixed loads, Eco for the lowest energy and Intensive for baked-on pots. Leaving the door ajar after the cycle lets steam out.
- Troubleshooting orderIf dishes come out dirty, check the spray arms and filters first, then the loading and then the detergent. If the dishwasher does not drain, check the drain hose, the air gap and the disposer knockout plug, which new installations sometimes forget to remove.
Where these figures were read. bosch-home.com/us/en/product/SHS43CF5N (Bosch SHS43CF5N product page)
Manufacturer support for this product line. Bosch Home Appliances — Owner support. Official Bosch appliance manuals, error-code help, cleaning and service entry point.
Also read for this model. Bosch — SHS43CF5N 300 Series dishwasher spec sheet.
Exact questions
Questions that only have an answer for the Bosch 300 Series SHS43CF5N dishwasher
Water is left in the bottom of my Bosch 300 dishwasher.+
A small amount of clean water in the filter recess at the bottom is normal — it keeps the seal from drying out. If there is a real pool of dirty water, it is not draining: clean the filter, check the drain hose is not kinked and the air gap (if fitted) is clear, and — if a garbage disposer was recently installed — confirm the disposer's knockout plug was removed, a very common cause of a new dishwasher not draining.