On the covered Amana range, 4D21, 4D22, 4D41, 4D42, Cooling Fan Speed, F7 E5, F7 E6, F8 E0, F8 E2 means the control senses the fan that cools the electronics turning at the wrong speed, or not turning First, let the oven cool and make sure nothing sits over the vent above the door.
Differential
Likely causes of “Amana range code 4D21, 4D22, 4D41, 4D42, Cooling Fan Speed, F7 E5, F7 E6, F8 E0, F8 E2”, and how to tell them apart
- 1
The cooling fan spins too slowly
What separates it The cabinet and control get warm during a long bake
How to confirm Listen for the fan after the oven has been on for ten minutes
- 2
The fan runs too fast or erratically
What separates it A loud whine from behind the control panel
How to confirm Note whether the noise changes as the oven heats
- 3
Lint, dust or a blocked vent
What separates it Hot air at the top of the range and little airflow
How to confirm Check that nothing covers the vent above the door
- 4
A fan motor wearing out
What separates it The noise grows gradually over months
How to confirm A technician checks the fan for drag
- 5
A wiring or connector fault
What separates it The fan looks fine yet the code returns
How to confirm A technician tests the harness to the fan
Before you touch a setting
Record this first — changing settings destroys the evidence
- The code or the words Cooling Fan Speed on the display
- How long the oven had been on
- Whether you can hear the fan
- The model number
Try in this order
0 of 12 completedWhat to do first
ReversibleLet the oven cool and make sure nothing sits over the vent above the door.
Correct only the documented fault domain
ReversibleSwitch the breaker off for a minute; if the fan stays silent or the code comes back, a technician tests the fan motor and its plug. A power reset is the whole of what Amana publishes for this code: remove power for 1 minute, restore it, and watch whether the code returns.
Let the oven cool
ReversibleThe fan sensor reads best from a cold start.
Check the vent
ReversibleLook above the door for anything blocking the air.
Reset the breaker for a minute
ReversibleThen restore the power.
Start a short bake
ReversibleListen for the fan to start with the heat.
Note the sound
ReversibleWhine, rattle or silence tells the technician which part.
Book service
ReversibleIf the code comes back.
Check the area above the door
ReversibleThe vent above the oven door lets hot air leave the cabinet. Make sure that no towel, pan or cooking tray blocks it, since a blocked vent makes the cooling fan work harder and can set the code.
Note the time of the code
ReversibleA code that appears after an hour of baking points at heat and a labouring fan, while a code at power-up points at a fan that cannot start. Telling the technician which helps them to choose the first test.
Look at the oven's use pattern
ReversibleA range that is used for long roasts and self-cleans every month works its cooling fan hard. Tell the technician how the oven is used, since a heavily used range wears its fan sooner.
Check the back of the range
ReversiblePull the range forward a little, with the power off, and look at the area behind it for lint and dust that might be drawn into the vent. Vacuum what you can reach.
Model-specific
What is true of this model and not of its siblings
- Part involved
- The oven cooling fan.
- Warning
- A range that is too hot outside should not be used.
Stop boundary
When this stops being a self-service repair
- !Stop baking if the top of the range or the control panel is too hot to touch
- !If the code returns after a breaker reset, book Amana service with the model number
- !Do not cover the vents to cook faster
Evidence ledger
Sources behind this answer
Exact questions
Common questions
What does 4D21, 4D22, 4D41, 4D42, Cooling Fan Speed, F7 E5, F7 E6, F8 E0, F8 E2 mean on a Amana range?+
the control senses the fan that cools the electronics turning at the wrong speed, or not turning
What does the cooling fan on an Amana range do?+
It moves room air through the cabinet behind the control panel while the oven heats, so the electronics stay within their limit.
Why would it show a speed fault?+
The control senses the fan's rotation, and a slow, fast or stopped fan reads as a fault.
Is it safe to keep baking?+
Not if the range gets very hot outside; stop and let it cool.
Can I clean it?+
Only the vents you can reach, with the oven cold and the breaker off.
What does service replace?+
The fan motor or its connector, after tests.
Will a reset fix it?+
It clears a glitch; a failing fan returns.
Why does 4D41 appear in several forms?+
Amana's tables list 4D21, 4D22, 4D41, 4D42 and Cooling Fan Speed as one group, because they name the same fan fault on different displays.
Is the fan hard to replace?+
It is a modest part, and a technician can fit it in a short visit.
Does it affect the self-clean?+
Yes, a failing cooling fan is a reason not to run a clean cycle.
Is 4D41 the same as Cooling Fan Speed?+
Yes, Amana lists 4D21, 4D22, 4D41, 4D42 and Cooling Fan Speed in one group.
What do F7 E5 and F8 E2 mean?+
They are older displays for the same cooling fan fault.
Can I replace the fan myself?+
A confident owner can, with the range unplugged, but a technician is wise.
Why only after a long bake?+
The fan's speed is checked once the oven is hot.