On the covered GE range or wall oven platform, FD means GE says FD usually means either the probe or the receptacle may need to be replaced. First, remove and reseat the correct probe after cooldown. GE says the probe or the receptacle may need to be replaced.
Differential
Likely causes of “GE range or wall oven code FD”, and how to tell them apart
- 1
A meat probe or its receptacle that has failed
What separates it FD shows when the probe is plugged in or after a probe cook
How to confirm GE says the probe or the receptacle may need to be replaced
- 2
A probe worn out from heat
What separates it The probe is old, which points to a probe worn out from heat
How to confirm A third-party repair site says a good probe reads about 1,080 to 1,100 ohms at room temperature
- 3
A probe jack coated with food residue
What separates it The receptacle in the oven wall is greasy or crusted
How to confirm Once the oven is cool, wipe around the jack with a damp cloth and dry it
Before you touch a setting
Record this first — changing settings destroys the evidence
- The exact characters shown on the display: FD
- Whether the probe is plugged in
- Whether it clears with the probe removed
Try in this order
0 of 5 completedWhat to do first
ReversibleRemove and reseat the correct probe after cooldown.
Correct only the documented fault domain
ReversibleGE says a trained service technician should diagnose and correct the issue.
Remove the probe
ReversibleUnplug the meat probe and see whether FD clears without it.
Try another cook
ReversibleCook without the probe to see if the oven itself works normally.
Replace the part
ReversibleReplace the probe or the receptacle, whichever GE's technician finds faulty.
Model-specific
What is true of this model and not of its siblings
- Displayed as
- FD.
- Parts named
- Meat probe; probe receptacle.
Evidence ledger
Sources behind this answer
Where the manufacturer's article stops. The probe resistance is a third-party figure, not GE's.
Exact questions
Common questions
What does FD mean on a GE range or wall oven?+
GE says FD usually means either the probe or the receptacle may need to be replaced.
Can I keep cooking without the probe?+
Yes, if the oven works normally without it.
What should a good probe read?+
Around 1,080 to 1,100 ohms at room temperature, according to a third-party repair site.
Can I leave the probe plugged in when I am not using it?+
No; remove it after every use, because heat and residue can damage the probe and the jack.