Direct answer
For the LG C5 OLED evo TV, console/game support, HDMI port bandwidth, cable, input mode and format must all align. First, connect the console directly to the labeled high-bandwidth port.
What this covers
- LG C5 OLED evo TV (OLED42/48/55/65/77/83C5*)
- 2025 LG TV; OLED/QNED panel, webOS release, HDMI bandwidth and Magic Remote vary by model and size.
- The specific fault this record addresses: game mode, 120 Hz or VRR is not working
What it does not cover
- ×The same symptom on a different LG product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
The console is connected to a port that does not support the feature
What separates it VRR or 4K120 is unavailable, while the same console works normally at lower settings.
How to confirm Most televisions support their highest-bandwidth features on only some ports, and the manual states which. This is the most common cause.
- 2
The port's enhanced-format setting is not enabled
What separates it The console does not offer the higher modes at all.
How to confirm Many sets require an explicit per-port setting — named Enhanced, HDMI UHD Colour, Input Signal Plus or similar — before the port will negotiate full bandwidth.
- 3
The cable cannot carry the bandwidth
What separates it The mode enables and then drops out, or the picture blanks intermittently.
How to confirm See hdmi-no-signal. HDMI 2.1 features need substantially more bandwidth than 4K60.
- 4
Game mode is not selected
What separates it Input lag feels high even though VRR is active.
How to confirm Game mode bypasses most picture processing, and that processing is what causes the lag. Some sets switch automatically via ALLM; others require it to be selected manually per input.
- 5
A receiver or soundbar in the chain cannot pass the format
What separates it The feature works when the console is connected directly and not when routed through another device.
How to confirm The weakest device in the chain sets the ceiling for everything behind it.
- 6
VRR is causing visible brightness fluctuation
What separates it The feature works but produces flickering, worst in menus and loading screens.
How to confirm See flicker. This is a known characteristic of VRR on many panels at low frame rates rather than a fault.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- Which HDMI port the console is connected to, and whether the manual lists it as supporting the feature.
- Whether the port's enhanced-format setting is enabled.
- What the console reports it is actually outputting.
- Whether anything sits between the console and the television.
Move the console to a port the manual lists as supporting the feature
ReversibleMost sets support their highest-bandwidth features on only some ports, and this is the most common cause.
Enable the port's enhanced-format setting
ReversibleNamed Enhanced, HDMI UHD Colour or Input Signal Plus depending on brand; without it the port will not negotiate full bandwidth.
Confirm game mode is active for that input
ReversibleGame mode bypasses the picture processing that causes input lag, and some sets need it selected manually per input.
Connect the console directly, bypassing any receiver or soundbar
ReversibleThe weakest device in the chain limits the whole chain.
Check what the console reports it is outputting
ReversibleBoth ends have to agree, and the console's own display settings will show what it actually negotiated.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- OLED42/48/55/65/77/83C5*. 2025 LG TV; OLED/QNED panel, webOS release, HDMI bandwidth and Magic Remote vary by model and size.
- Panel
- OLED evo (conventional WOLED, not the G5's Tandem panel) with Brightness Booster Max and the Alpha 9 AI Processor Gen8, peaking over 1,000 nits. Self-emissive, so there is no backlight bloom; a large bright window dimming slightly is the Auto Brightness Limiter working as designed, not a defect.
- Smart platform
- webOS 25 with the Magic Remote. Updates: Settings › Support › Software Update; screen share is AirPlay 2 and Miracast. Tizen / Google TV / Roku TV steps do not apply.
- Gaming / HDMI
- Four HDMI 2.1 (48 Gbps) ports up to 144 Hz with VRR, ALLM, G-Sync and FreeSync Premium. The high-refresh and VRR modes require Game Optimizer on for that input and a 48 Gbps cable; without those the input stays at 60 Hz.
- eARC
- eARC is on HDMI 2. Route a soundbar or AV receiver there and enable SIMPLINK (HDMI-CEC) on both ends before treating an ARC/Atmos dropout as a hardware fault.
- Symptom boundary
- This record covers LG C5 OLED evo TV when it game mode, 120 Hz or VRR is not working. A different symptom on the same hardware, or this symptom on a different LG product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Do not use HDMI splitters or switches in a VRR or 4K120 path unless they explicitly support HDMI 2.1 bandwidth — most silently downgrade it.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. LG Support publishes this as "TV and home theater support". Official LG television manuals, webOS support, diagnostics and repair entry point. What that article does not carry is the model boundary — it is written for a product line, and OLED42/48/55/65/77/83C5* is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
My LG C5 screen looks dimmer than expected in bright scenes.+
A large bright area dimming is the Auto Brightness Limiter, standard on all OLEDs including the C5. It is not a fault. Turn off Energy Saving (Settings › Support › Energy Saving) and the ambient light sensor to stop the other automatic dimming; the ABL on full-screen brightness is intentional and cannot be switched off.
Which HDMI port should I use for my PS5 or Xbox Series X on the C5?+
Any of the four — all four are full HDMI 2.1 at 48 Gbps, unlike LG's B-series where only some ports are full-bandwidth. Use a certified Ultra High Speed cable and turn on Game Optimizer for that input to get 4K 120/144 Hz and VRR. HDMI 2 also carries eARC if you are chaining audio through the TV.
My console won't offer 4K120 or VRR on this TV.+
Check which port it is plugged into. Most televisions support their full HDMI 2.1 bandwidth on only some of their ports — often two of four — and the manual says which. After moving it, enable that port's enhanced-format setting, which brands call Enhanced, HDMI UHD Colour or Input Signal Plus; without it the port will not negotiate the higher modes at all.
VRR is on but the game still feels laggy.+
VRR and game mode are different things. VRR matches the refresh rate to the frame rate to remove tearing; game mode bypasses the television's picture processing, which is what actually causes input lag. Make sure game mode is active for that specific input — some sets switch automatically, others need it set manually per port.
Does this answer apply to every LG model?+
No. It is scoped to OLED42/48/55/65/77/83C5*. 2025 LG TV; OLED/QNED panel, webOS release, HDMI bandwidth and Magic Remote vary by model and size.
What should I record before troubleshooting game mode or 120 Hz or VRR?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing game mode, 120 Hz, VRR. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Stop for hot cables, port damage or persistent flicker in menus.
Answer for the exact device and software version shown above.