Direct answer
For the LG G5 OLED evo TV, antenna input/region, coax path, signal and a fresh channel scan should be verified. First, connect the antenna directly and select Air/Antenna.
What this covers
- LG G5 OLED evo TV (OLED55/65/77/83/97G5*)
- 2025 LG TV; OLED/QNED panel, webOS release, HDMI bandwidth and Magic Remote vary by model and size.
- The specific fault this record addresses: cannot find antenna channels
What it does not cover
- ×The same symptom on a different LG product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
The tuner is set to Cable instead of Antenna
What separates it A scan completes and finds few or no channels.
How to confirm The setting is often called Antenna/Air versus Cable/STB, and it changes which frequencies are scanned entirely. It is the most common cause of a scan finding nothing.
- 2
No channel scan has been run
What separates it No channels at all on a new set or after a factory reset.
How to confirm Televisions do not scan automatically. The scan has to be started from the menu and takes several minutes.
- 3
The antenna is aimed poorly or is too low
What separates it Some channels come in and others do not, or reception varies with weather.
How to confirm Broadcast towers are in specific directions, and stations broadcast from different sites — which is why partial reception is normal with a poorly aimed antenna. Height and a clear line of sight matter more than the antenna's advertised range.
- 4
A splitter or long cable run has weakened the signal
What separates it Reception degraded after the cable was split to another room or extended.
How to confirm Every split roughly halves the signal. Connect the antenna directly to the set as a test.
- 5
An amplifier is overloading the tuner
What separates it Strong local stations break up while distant ones improve, with an amplified antenna in use.
How to confirm Amplifiers boost noise along with signal and can overload a tuner on strong local channels. Try bypassing it.
- 6
Broadcasters changed frequency
What separates it Channels that used to work disappeared, with no change at home.
How to confirm Broadcast frequency reallocations happen periodically and require a fresh rescan. Rescanning is the documented remedy.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- Whether the tuner input type is set to Antenna rather than Cable.
- Whether a full channel scan has actually been run since the antenna was connected.
- Whether some channels work and others do not, which points at aiming rather than connection.
- Whether the antenna cable is split or amplified.
Set the tuner input type to Antenna or Air, not Cable
ReversibleThis changes which frequencies are scanned and is the most common reason a scan finds nothing.
Run a full channel scan and let it complete
ReversibleTelevisions never scan on their own, and the scan takes several minutes.
Connect the antenna directly to the set, bypassing splitters
ReversibleEvery split roughly halves the available signal.
Re-aim the antenna and raise it if possible
ReversibleBroadcast is line-of-sight, and height with a clear view matters more than an antenna's advertised range.
Bypass any amplifier as a test
ReversibleAmplifiers can overload a tuner on strong local channels while helping distant ones.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- OLED55/65/77/83/97G5*. 2025 LG TV; OLED/QNED panel, webOS release, HDMI bandwidth and Magic Remote vary by model and size.
- Panel
- OLED evo with LG's 2025 Primary RGB Tandem (four-stack) panel and Brightness Booster Ultimate — LG's brightest OLED, rated around three times the brightness of the B-series in a 10% window. Because it is self-emissive there is no backlight to bloom or clould, so a 'dimming' complaint is almost always the Auto Brightness Limiter pulling back a large bright window (normal OLED behaviour) or Energy Saving / ambient light sensing, not a backlight fault.
- Smart platform
- webOS 25 with the Magic Remote (pointer + voice). Update path is Settings › Support › Software Update; screen sharing is built-in AirPlay 2 and Miracast. App, cast and remote instructions written for Samsung Tizen, Google TV or Roku TV do not map to webOS.
- Gaming / HDMI
- Four HDMI 2.1 (48 Gbps) ports supporting up to 165 Hz, VRR, ALLM, NVIDIA G-Sync and AMD FreeSync Premium. High-refresh/VRR only engages when the input's Game Optimizer is on and the source is on an HDMI 2.1 port — a 'no 120/165 Hz or VRR' report is nearly always that mode or a sub-2.1 cable, not the panel.
- eARC
- eARC is on HDMI 2. A soundbar or receiver that loses Dolby Atmos or ARC audio should be on that specific port with HDMI-CEC (SIMPLINK) enabled on both devices before the fault is treated as hardware.
- Symptom boundary
- This record covers LG G5 OLED evo TV when it cannot find antenna channels. A different symptom on the same hardware, or this symptom on a different LG product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Do not work on a roof or mast antenna in wet or windy conditions, near power lines, or without proper fall protection — this is the one part of television troubleshooting that genuinely injures people.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. LG Support publishes this as "TV and home theater support". Official LG television manuals, webOS support, diagnostics and repair entry point. What that article does not carry is the model boundary — it is written for a product line, and OLED55/65/77/83/97G5* is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
Why does my LG G5 dim during bright scenes?+
That is the OLED Auto Brightness Limiter, not a fault. When a large part of the screen is very bright, the TV limits total panel power to protect the pixels and manage heat, so a big white window dims slightly. It is normal OLED behaviour on every LG OLED, including the brightest G5. Turning off Energy Saving and the ambient light sensor reduces other automatic dimming, but ABL on full-screen brightness cannot be disabled.
My LG G5 won't run 4K 120Hz or VRR from my console/PC.+
Connect the source to one of the HDMI 2.1 ports with a certified 48 Gbps Ultra High Speed cable, then turn on Game Optimizer for that input (Settings › General › Game Optimizer). VRR, ALLM and the 120–165 Hz modes only activate when that mode is on and the source is set to output them; the panel supports up to 165 Hz but it will sit at 60 Hz until the input mode is switched.
I ran a scan and it found almost nothing.+
Check the tuner's input type first — it needs to be set to Antenna or Air rather than Cable. That single setting changes which frequencies the set scans, and leaving it on Cable is the most common reason a scan comes back empty even with a perfectly good antenna.
I get some channels but not others.+
That is normal with a poorly aimed antenna, because different stations broadcast from different towers in different directions. Reception is line-of-sight, so aiming, height and a clear view matter far more than the antenna's advertised range. Re-aim toward the towers you are missing and rescan.
Does this answer apply to every LG model?+
No. It is scoped to OLED55/65/77/83/97G5*. 2025 LG TV; OLED/QNED panel, webOS release, HDMI bandwidth and Magic Remote vary by model and size.
What should I record before troubleshooting antenna or channel scan?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing antenna, channel scan. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Avoid roof work, damaged outdoor wiring and lightning exposure.
Answer for the exact device and software version shown above.