Direct answer
For the Samsung QN90D Neo QLED 4K TV, outlet, external devices, sleep/timer/CEC and internal power protection should be isolated. First, disconnect external devices and test the TV on a verified outlet.
What this covers
- Samsung QN90D Neo QLED 4K TV (QN43/50/55/65/75/85QN90D*)
- Samsung TV; panel type, One Connect box, HDMI 2.1 ports, Tizen year and remote vary by model.
- The specific fault this record addresses: keeps restarting or will not stay on
What it does not cover
- ×The same symptom on a different Samsung product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
The set is in standby rather than off, with accumulated state
What separates it General sluggishness, apps misbehaving, or spontaneous restarts on a set that is never unplugged.
How to confirm Unplug for 60 seconds. This forces a real restart that the remote's power button does not, and resolves a surprising proportion of erratic behaviour.
- 2
HDMI-CEC is switching the set on or off
What separates it The television turns itself on when another device is used, or off when one is switched off.
How to confirm CEC lets connected devices control the set's power. It is behaving as designed; disabling CEC stops it, at the cost of losing one-remote convenience.
- 3
A power supply capacitor is failing
What separates it The set clicks repeatedly when switched on and does not start, or restarts spontaneously and increasingly often.
How to confirm A repeated clicking on start attempt is characteristic of a power supply that cannot hold up. This is a service repair.
- 4
The set is overheating
What separates it Shutdowns after a period of use, in a recessed cabinet or with blocked ventilation.
How to confirm Check clearance around the set, particularly above and behind, and confirm vents are not blocked.
- 5
A scheduled timer or eco setting is switching it off
What separates it The set turns off at a consistent time, or after a fixed period with no remote input.
How to confirm Sleep timers and no-signal or inactivity auto-off settings are frequently enabled by default and are commonly mistaken for a fault.
- 6
The power outlet or cable is faulty
What separates it No response at all, no standby light.
How to confirm Test the outlet with another device and reseat the cable at both ends before assuming the set has failed.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- Whether the standby light is on, and whether it flashes in a pattern — many sets encode a fault code in that pattern.
- Whether shutdowns happen at a consistent time or after a consistent period, which points at a timer.
- Whether the set clicks repeatedly when a start is attempted.
- Whether the set is in a recessed cabinet with limited ventilation.
Unplug the television for 60 seconds
ReversibleThis forces a genuine cold start that the remote's power button does not, and resolves a large share of erratic behaviour.
Check for sleep timers and inactivity auto-off settings
ReversibleBoth are often enabled by default and are commonly mistaken for a fault.
Disable HDMI-CEC as a test if the set powers on or off with other devices
ReversibleThat behaviour is CEC working as designed rather than a fault.
Confirm ventilation clearance around and above the set
ReversibleA recessed cabinet with restricted airflow causes shutdowns after a period of use.
Note any flashing pattern on the standby light before calling for service
ReversibleMany manufacturers encode a fault code in that pattern, and it will be the first thing a technician asks for.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- QN43/50/55/65/75/85QN90D*. Samsung TV; panel type, One Connect box, HDMI 2.1 ports, Tizen year and remote vary by model.
- Panel — Mini-LED LCD, not OLED
- Neo QLED is a Mini-LED LCD with Quantum Matrix local dimming. It has a backlight, so a faint halo/bloom around bright objects on a dark background and slightly raised blacks in a dark room are normal LCD behaviour, not a fault — the opposite diagnosis from an OLED. Larger QN90D sizes use a wide-angle (ADS) panel and smaller ones a VA panel, so viewing-angle and contrast differ by size.
- No Dolby Vision
- Like every Samsung TV, the QN90D does NOT support Dolby Vision. It plays HDR10, HDR10+ and HLG. A title that offers Dolby Vision will fall back to HDR10/HDR10+ here — that is by design, not a fault, and no setting or update adds Dolby Vision.
- Smart platform
- Tizen with Smart Hub and the Samsung Gaming Hub (cloud gaming). Update path is Settings › Support › Software Update; screen sharing is Smart View (Miracast) and AirPlay 2. webOS, Google TV and Roku steps do not apply.
- Gaming / HDMI
- Four HDMI 2.1 ports with 4K 144 Hz, VRR (FreeSync Premium Pro), ALLM and the Game Bar. Enable Game Mode for the input; the Game Bar shows the live refresh and VRR state, which is the fastest way to confirm whether 120/144 Hz actually engaged.
- Symptom boundary
- This record covers Samsung QN90D Neo QLED 4K TV when it keeps restarting or will not stay on. A different symptom on the same hardware, or this symptom on a different Samsung product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Unplug immediately for a burning smell, buzzing or crackling from the rear panel, or visible bulging — and do not open the set, because large televisions store charge in the power supply well after being unplugged.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. Samsung publishes this as "Samsung TV or projector powers on or off by itself". Covers a TV that keeps restarting or will not stay on, including Anynet+ (HDMI-CEC), sleep timers and eco settings. Probed 2026-08-21: title-verified. What that article does not carry is the model boundary — it is written for a product line, and QN43/50/55/65/75/85QN90D* is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
Why won't Dolby Vision play on my Samsung QN90D?+
No Samsung TV supports Dolby Vision, including the QN90D — Samsung backs HDR10+ instead. The app detects the TV has no Dolby Vision and streams the HDR10 or HDR10+ version, which is why you see HDR10+ where another brand would show Dolby Vision. It is a deliberate format choice by Samsung, not a fault, and it cannot be enabled by any setting or update.
I see a glow around bright objects on my QN90D.+
That is backlight blooming, normal on a Mini-LED LCD like the Neo QLED. Unlike an OLED it lights the picture with a zoned backlight, so a bright object on black can show a faint halo. Local Dimming set to High tightens it; it is a characteristic of the panel technology, not a defect.
My TV keeps restarting itself.+
Start by unplugging it from the wall for a full 60 seconds. Modern televisions never really switch off — the power button only puts them in standby with the platform still running — so accumulated state builds up and causes exactly this. That forced cold start resolves a surprisingly large share of spontaneous restarts.
The TV turns on by itself whenever I use my console.+
That is HDMI-CEC working as designed rather than a fault. It lets connected devices switch the television on and change to their input automatically. If you would rather it did not, disable CEC in the set's settings — you will lose the one-remote convenience along with it.
Does this answer apply to every Samsung model?+
No. It is scoped to QN43/50/55/65/75/85QN90D*. Samsung TV; panel type, One Connect box, HDMI 2.1 ports, Tizen year and remote vary by model.
What should I record before troubleshooting restarting or turns off?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing restarting, turns off. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Unplug for clicking loops, smoke, heat, arcing or a swollen power supply area.
Answer for the exact device and software version shown above.