Direct answer
For the Sony BRAVIA 8 II QD-OLED TV, infrared power/volume and Bluetooth/RF navigation may be separate paths. First, replace/charge batteries and test close to an unobstructed receiver.
What this covers
- Sony BRAVIA 8 II QD-OLED TV (K-55/65XR80M2)
- 2025 Sony BRAVIA; Google TV release, panel, processor and HDMI 2.1 port allocation vary by size/model.
- The specific fault this record addresses: remote will not control the TV
What it does not cover
- ×The same symptom on a different Sony product line, which has its own record and its own cited source
- ×An on-screen error code whose meaning has not been checked against this exact model's manual
- ×Live electrical, gas, sealed-system, internal battery-cell or structural repair — a technician boundary, not a self-service step
Differential
What actually causes this, and how to tell them apart
These are ordered by how often each one is the answer, not by how easy it is to try. The point of the middle column is that two causes producing the same headline symptom rarely produce the same detail — that detail is what tells you which one you have before you change anything.
- 1
The batteries are weak
What separates it The remote works intermittently, at short range only, or needs button presses repeated.
How to confirm Weak batteries produce this long before they die completely. Replace both with fresh ones rather than testing with a mix.
- 2
The infrared emitter or receiver is obstructed
What separates it An infrared remote works only when pointed precisely, or not at all, with a soundbar or decorative item in front of the set's lower bezel.
How to confirm Point a phone camera at the remote's emitter and press a button — most phone cameras show the infrared LED as a faint purple flash, which proves the remote is transmitting.
- 3
A Bluetooth remote has lost its pairing
What separates it A voice or motion remote stops working entirely, while basic power and volume may still work if it also has infrared.
How to confirm Re-pair using the model's documented sequence, usually holding two specific buttons for several seconds while near the set.
- 4
The remote was dropped or has liquid damage
What separates it Specific buttons stop responding while others work.
How to confirm Individual dead buttons point at the remote's contacts rather than the pairing or the television.
- 5
The television has stopped responding to any input
What separates it Neither the remote nor the set's own physical buttons respond.
How to confirm If the set's own buttons also fail, the remote is not the problem. Unplug the set for 60 seconds — see power-restart.
Before you touch a setting
Record this first — changing settings destroys the evidence
Every item below stops existing the moment a reset, re-pair or settings change is made. Written down first, they are what separates the causes above; recovered afterwards, they are guesswork.
- Whether the remote is infrared, Bluetooth, or both — this determines which tests apply at all.
- Whether a phone camera shows the infrared emitter flashing when a button is pressed.
- Whether the television's own physical buttons still work.
- Whether all buttons fail or only some.
Replace both batteries with fresh ones
ReversibleWeak batteries cause intermittent and short-range operation long before the remote dies completely.
Point a phone camera at the remote's emitter and press a button
ReversibleMost phone cameras render infrared as a faint purple flash, which proves the remote is transmitting.
Check that nothing blocks the set's infrared receiver
ReversibleA soundbar or ornament in front of the lower bezel is a very common cause.
Re-pair a Bluetooth or voice remote using the documented button sequence
ReversibleUsually two specific buttons held for several seconds while close to the set.
Test the television's own physical buttons
ReversibleIf they fail too, the remote is not the problem and the set itself needs a power cycle.
Model-specific
What is true of this model and not of its siblings
Generic advice for the product line fails here. Each item below is a property of this specific model family that changes which of the steps above apply to you.
- Model scope
- K-55/65XR80M2. 2025 Sony BRAVIA; Google TV release, panel, processor and HDMI 2.1 port allocation vary by size/model.
- Panel — QD-OLED
- 2025 flagship OLED using the latest Samsung Display QD-OLED panel with the Cognitive Processor XR — brighter and more saturated than the WOLED BRAVIA 8. Self-emissive, so a bright-window dim is the Auto Brightness Limiter, not backlight bloom.
- Smart platform
- Google TV. Update at Settings › System › About › System software update; Chromecast built-in and AirPlay 2. Acoustic Surface Audio+ uses the screen itself as a speaker, so 'sound from the screen' is by design.
- Dolby Vision — yes
- Supports Dolby Vision (incl. gaming), HDR10, HLG and IMAX Enhanced — unlike Samsung.
- Gaming / HDMI — 2 ports, one shared with eARC
- Two HDMI 2.1 ports (HDMI 3 and 4) for 4K 120 Hz, VRR, ALLM and SBTM; HDMI 3 is also eARC. Console on HDMI 4 if a soundbar takes eARC. 'Perfect for PlayStation 5' features included.
- Panel
- An OLED panel, where each pixel emits its own light. Dark mode genuinely reduces consumption because black pixels are switched off, and a static bright element left on screen for very long periods is the one wear risk this panel type has that LCD does not.
- Symptom boundary
- This record covers Sony BRAVIA 8 II QD-OLED TV when it remote will not control the TV. A different symptom on the same hardware, or this symptom on a different Sony product line, has its own record with its own causes and its own cited source.
Stop boundary
When this stops being a self-service repair
Continuing past any one of these costs more than the repair saves — in safety, in warranty, or in evidence a technician needs.
- !Remove the batteries from a remote showing corrosion or leakage and do not handle the residue with bare hands.
Evidence ledger
Sources behind this answer
Visible sources support the visible claims. Home Product Support records the publisher, the fact used and the review date; community reports can suggest an issue but do not become a published fact on their own.
Where the manufacturer's article stops. Sony Support publishes this as "Television and computer support". Official Sony and BRAVIA manuals, firmware and troubleshooting support. What that article does not carry is the model boundary — it is written for a product line, and K-55/65XR80M2 is the scope applied here. Where a control label, terminal, indicator pattern or reset sequence differs on your unit, the manual for that exact model is the authority, not this page and not the article.
Exact questions
Common follow-ups
The sound on my Sony BRAVIA 8 II seems to come from the screen.+
That is intentional — the BRAVIA 8 II uses Acoustic Surface Audio+, which vibrates the OLED panel itself to produce sound, so the audio genuinely comes from the picture rather than down-firing speakers. It is a feature, not a fault, and it can even act as the centre channel in a surround setup.
How can I tell if the remote is actually sending anything?+
Point your phone's camera at the front of the remote and press a button while watching the screen. Most phone cameras can see infrared even though your eyes cannot, so you will see a faint purple flash from the emitter. If it flashes, the remote is transmitting and the problem is at the television's receiver or in its settings.
My voice remote stopped working but the power button still does.+
That combination points at lost Bluetooth pairing. Many voice remotes use infrared for basic power and volume and Bluetooth for everything else, so when the pairing drops you keep the basics and lose the rest. Re-pair it using the sequence in the manual, usually two buttons held together near the set.
Does this answer apply to every Sony model?+
No. It is scoped to K-55/65XR80M2. 2025 Sony BRAVIA; Google TV release, panel, processor and HDMI 2.1 port allocation vary by size/model.
What should I record before troubleshooting remote not working or pairing?+
Record the complete model identifier, exact message or indicator, software/firmware where visible, the operating stage and what still works.
Why is a factory reset not the first step?+
A reset can erase accounts, networks, maps, schedules or preferences without distinguishing remote not working, pairing. The ordered checks preserve that evidence.
When should I stop and use qualified service?+
Stop for battery corrosion, swelling, heat or liquid damage.
Answer for the exact device and software version shown above.