On the covered eufy RoboVac L70 and G series, Error 1 means the front bumper is stuck. eufy says this usually happens when debris lodges in the bumper after the RoboVac bumps into furniture, and that a scratched bumper lens can also trigger it. First, tap, pull and shake the bumper repeatedly to dislodge dust and debris.
Try in this order
0 of 2 completedWhat to do first
ReversibleTap, pull and shake the bumper repeatedly to dislodge dust and debris.
Correct only the documented fault domain
Reversibleeufy's steps: check for very dark walls and furniture, which absorb the infrared signals the RoboVac uses to detect obstacles and make it hit them more often; eufy suggests fitting one or two bumper sponges above and below the lens to protect it. If you are unsure whether the lens is badly scratched, eufy says to send it a picture. If none of that helps, eufy says this bumper error can usually be solved by replacing the signal bracket, for the G30, G35 and G40 series only, or by a warranty claim through eufy support.
Evidence ledger
Sources behind this answer
Exact questions
Common questions about “eufy RoboVac L70 and G series showing Error 1”
What does Error 1 mean on a eufy RoboVac L70 and G series?+
The front bumper is stuck. eufy says this usually happens when debris lodges in the bumper after the RoboVac bumps into furniture, and that a scratched bumper lens can also trigger it.