iRobot Roomba 100 to Max 800 series and Combo error codes

iRobot Roomba 100 to Max 800 series and Combo code error-1000-1001-side-brush-stall

Side brush stall. Error 1000: the left side brush is not spinning. Error 1001: the side brush cannot turn.

iRobot's combined chart names the side brush as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-1008-669-752-pad-actuator-stall

Pad actuator stall. The pad actuator mechanism failed to work (1008), or there has been a stall with the pad actuator (669 and 752).

iRobot's combined chart names the mopping pads and pad actuator as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-1010-navigation

Navigation. This error may occur when a new obstacle is in the robot's path.

iRobot's combined chart names the environment as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-1025-laser-sensor-abnormality

Laser sensor abnormality. The LiDAR is not working and the robot failed to navigate properly.

iRobot's combined chart names the environment as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-1026-mop-stuck

Mop stuck (Roomba Plus 400 and Plus 500 only). The left or right mop pad is tangled or stuck.

iRobot's combined chart names the mopping pads as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-1029-incompatible-map

Incompatible map (Roomba Plus 400, Plus 500 and Max 700). The map has become corrupted, and iRobot says to delete the existing map and remap.

iRobot's combined chart names the map as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-1030-stuck-in-no-mop-zone

Stuck in a No Mop Zone. iRobot says to rescue the robot by lifting it and placing it outside the zone it is trapped in, or back on the dock.

iRobot's combined chart names the no-mop zone as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-14-bin-missing

Bin missing. The robot is not detecting an installed bin.

iRobot's combined chart names the bin as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-16-navigation-error

Navigation error. The robot failed to navigate properly.

iRobot's combined chart names navigation as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-19-undocking-error

Undocking error. The robot cannot leave the dock.

iRobot's combined chart names undocking as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-2-main-brush-stall

Main brush stall. The main brush cannot turn.

iRobot's combined chart names the main brush as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-26-vacuum-motor-stalled

Vacuum motor stalled. The vacuum is experiencing insufficient airflow.

iRobot's combined chart names the vacuum motor as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-266-subscription

Subscription. The robot must be set up in the app in order to operate.

iRobot's combined chart names the subscription as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-29-software-update

The robot was started while a software update was being performed.

iRobot's combined chart names the software update as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-32-map-version-mismatch

Map version mismatch. The Smart Map the robot created does not match the map in the Roomba HOME app.

iRobot's combined chart names the Smart Map as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-33-trapped-or-stuck

Trapped or stuck. The robot is unable to plan a path out of an area.

iRobot's combined chart names the environment as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-35-pad-error

Pad error. The robot tried to detect the attached pad and failed.

iRobot's combined chart names pad installation as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-350-353-evac-bag

The robot was unable to evacuate debris into the dock. Error 350: the evac bag is full or missing. Error 353: the evac bag is full.

iRobot's combined chart names the evac bag as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-36-bin-full-200-2000-only

Bin full (Roomba 200/2000 only). The DustCompactor arm inside the bin may no longer move.

iRobot's combined chart names emptying the bin as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-360-457-660-757-dock-communication

Dock communication failure. Error 360: the robot is not communicating with the AutoWash dock properly. Error 457: the dock is unable to refill the robot's water tank. Errors 660 and 757: communication failure between the dock and the robot.

iRobot's combined chart names the dock as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-365-evac-too-frequently

Evac too frequently. Too many evacuations. iRobot says to check the dock and bin for clogs.

iRobot's combined chart names the dock and bin as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-4-left-wheel-jammed

Left wheel jammed.

iRobot's combined chart names the left wheel as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-44-pump-issue

Pump issue. There is an issue with the pump activating when the robot is starting a mopping and vacuum mission.

iRobot's combined chart names filling the tank and bin as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-450-451-671-clean-water-tank

Clean water tank. Error 450: the clean water tank on the dock is missing. Error 451: the clean water tank level is too low. Error 671: the dock's fresh water tank is empty or not installed.

iRobot's combined chart names the clean water tank as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-455-pump-failure

Pump failure. There is an issue with the dock's pump.

iRobot's combined chart names the nozzle as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-46-low-battery

Low battery. The robot's battery is low and needs to be charged.

iRobot's combined chart names the battery as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-47-invalid-calibration-100-1000-200-2000

Invalid calibration (100/1000 and 200/2000 series).

Note the model, which decides whether this applies.

iRobot's combined chart says to contact customer support so that iRobot can remotely update a sensor in the robot.

iRobot Roomba 100 to Max 800 series and Combo code error-48-path-blocked

Path blocked. Obstacles are preventing the robot from navigating from room to room within the cleaning area.

iRobot's combined chart names the path as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-5-right-wheel-jammed

Right wheel jammed.

iRobot's combined chart names the right wheel as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-510-dock-software-updating

Dock software updating. The dock is updating its software.

iRobot's combined chart names the dock software as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-513-grey-water-pump-failure

Gray water pump failure. The pump that sucks the dirty water has had a failure.

iRobot's combined chart names a dock reboot as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-517-672-basin-overflow-or-dirty-water-tank

Dirty water. Errors 517 and 672: water cannot be removed from the overflow basin, or the dock's dirty or gray water tank is full or not installed. Error 653: the dirty water tank in the dock has been removed. Error 654: the gray water dock tank level is too full.

iRobot's combined chart names the dirty water tank and pad washing basin as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-520-dock-ir-communication-failure

Dock IrDA communication failure. The robot was not able to communicate with its dock over IrDA communication.

iRobot's combined chart names the IR sensors as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-6-cliff-sensor

The robot is stuck over an edge, on a threshold, or on a dark surface.

iRobot's combined chart names the cliff sensors as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-668-756-no-pad-attached

No pad attached. Error 756 (Max 700 series Combo): remove, clean and reinstall the mop pad, because there is no pad attached.

iRobot's combined chart names the pad as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-670-cleaning-bracket-not-installed

Cleaning bracket not installed. iRobot says to check that the dock's cleaning tray or mop pad wash basin is installed correctly.

iRobot's combined chart names the dock tray as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-68-camera-failure-plus-500

Camera failure (Roomba Plus 500 only). The robot is not receiving data from its camera.

iRobot's combined chart names a reboot as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-69-localization-error

Localization error. Obstacles are preventing the robot from navigating from room to room within the cleaning area.

iRobot's combined chart names adequate light as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-751-pad-drying-motor-failure

Pad drying motor failure. The blower motor has stalled and cannot run.

iRobot's combined chart names a dock reboot as what to check and gives no separate steps for this error on that page.

iRobot Roomba 100 to Max 800 series and Combo code error-9-bumper-jammed

Bumper jammed. The bumper is stuck and is not moving freely.

iRobot's combined chart names the bumper as what to check and gives no separate steps for this error on that page.