On the covered Whirlpool range, F6 E0, F6 E1, F6 E3, F6 E4, F6 E5, F6 EA, F8 EA, F0 E0 means the appliance manager or user interface lost communication with the oven control First, reset the power and see whether the code returns.
Differential
Likely causes of “Whirlpool range code F6 E0, F6 E1, F6 E3, F6 E4, F6 E5, F6 EA, F8 EA, F0 E0”, and how to tell them apart
- 1
The user interface and the oven control lost contact
What separates it Keys do not respond
How to confirm Reset the power and test
- 2
A loose keypad harness
What separates it The code comes and goes
How to confirm A technician reseats it
- 3
A wet panel
What separates it It follows cleaning
How to confirm Dry the panel
- 4
A failed control or interface
What separates it It returns after resets
How to confirm Book service
- 5
A glitch after a power cut
What separates it It appeared once
How to confirm Reset
Before you touch a setting
Record this first — changing settings destroys the evidence
- Which F6 code shows
- Whether keys respond
- Whether the panel was wet
- The model number
Try in this order
0 of 11 completedWhat to do first
ReversibleReset the power and see whether the code returns.
Correct only the documented fault domain
ReversibleCheck the harness between the boards, then replace the board Whirlpool names. A power reset is the whole of what Whirlpool publishes for this code: remove power for 1 minute, restore it, and watch whether the code returns.
Reset the power
ReversibleWhirlpool gives a one-minute breaker reset for each of these codes: turn the breaker off for one minute, restore power and run a bake cycle to see whether the code returns.
Check the harnesses
ReversibleWhirlpool names the appliance manager, the oven control or the user interface and the associated wiring, so a loose connector between boards is the first physical check.
Arrange service if it returns
ReversibleWhirlpool publishes no repair beyond the reset, so a code that returns is for a technician, who can test which board has failed.
Reset the power
ReversibleBreaker off for one minute.
Test the keys
ReversibleCancel and one function key.
Dry the panel
ReversibleWith a dry cloth.
Note the code
ReversibleAnd model number.
Avoid spray
ReversibleOn the keypad.
Book service
ReversibleIf it returns.
Model-specific
What is true of this model and not of its siblings
- Part
- Keypad and control.
- Care
- Keep liquids away.
Stop boundary
When this stops being a self-service repair
- !Do not swap boards from another range to test; the boards are matched to the model
- !If the code returns, book Whirlpool service
- !Do not spray the panel
- !Keep the oven off while the keys fail
Evidence ledger
Sources behind this answer
Where the manufacturer's article stops. Whirlpool's pages name components and a reset only.
Exact questions
Common questions
What does F6 E0, F6 E1, F6 E3, F6 E4, F6 E5, F6 EA, F8 EA, F0 E0 mean on a Whirlpool range?+
the appliance manager or user interface lost communication with the oven control
What do F6 E5, F6 EA and F8 EA mean?+
Whirlpool names the user interface and its wiring.
Should I replace a board?+
Not on a guess; the pages give no board-level test.
What does the interface communication code mean on a Whirlpool range?+
The appliance manager or interface lost communication with the oven control.
Is the neighboring interface code the same fault?+
Yes, same family.
Can moisture cause it?+
Yes.
What does service replace?+
The interface or control.
Which part is the interface?+
The keypad and display assembly that you touch, connected to the oven control by a ribbon or harness. If the two stop talking, the control shows a communication code.
Why does a power cut cause it?+
The two boards restart at slightly different moments, and a marginal connection can fail to reconnect, which a breaker reset cures.
Should I clean the keypad?+
Wipe it with a dry cloth. Liquid in the panel is a common cause of communication faults, so never spray cleaner on it.
What if only some keys work?+
That points to the keypad itself, and a technician will test it separately from the control.
Why do two codes describe the same fault?+
Whirlpool's control software shows the communication fault with a code that depends on the model's generation, so a newer range shows one and an older one shows the other.
Could a damp panel cause it?+
Yes, moisture on the keypad can stop the two boards talking, so dry the panel and leave the range off for a few hours.
Is it safe to use the cooktop?+
Usually the cooktop is on a separate circuit and still works, but follow the manual.
What should I tell service?+
The exact code, whether the keys respond and whether the range was cleaned before the fault.