Expanded exact-code directory
Maytag wall oven error codes
Maytag wall oven codes as Maytag Product Help lists them, each with its meaning and the first safe check.
A Maytag wall oven, single or double, shows its faults as an F code with a number or as a message on the control, and the code names the circuit that failed: a temperature sensor, the door lock, the cooling fan, a relay or the electronic control. This page lists the codes Maytag documents for its wall ovens, with each one's meaning and the first check.
Maytag wall oven codes
Wall ovens are hard-wired, so the breaker is your reset: power the oven off at the breaker for a minute, then restore it. Find the model number on the oven frame, on the left or right edge when the door is open, because a combination wall oven with a microwave above or below has extra codes for the microwave section.
Look at what the oven was doing. After a self-clean, a lock or temperature code usually means the oven was still hot when the control checked; let it cool and try again. At power-up, a dead panel or repeating code points at a stuck key or the control board.
Stop for a smell of burning, sparking, or any need to work on a hard-wired oven; line-voltage work belongs with a licensed technician.
On a Maytag wall oven the codes owners search for are the control family. 1C31, F03, F04 and relatives mean the electronic oven control reported an internal error, and the reset is the breaker off for a minute; replace the control only if the code returns straight away. 1C1C and F2 E0 to F2 E6 mean the user interface or keypad reported a fault or its wiring is loose. F6 E0 means a board lost communication with another. F9 means the oven appears to be wired wrongly at the home supply, which is a job for an electrician, not an oven part.
Maytag wall ovens come as single ovens, double ovens and combinations with a microwave, and the upper and lower cavities of a double oven fault independently. When a code appears, note which cavity was in use and whether the oven was cooling after a clean. A control that shows a code at power-up with a cold oven points at the board or a stuck key; a code after a clean points at the lock or the sensor.
Why does my Maytag wall oven need a breaker reset?
Wall ovens are hard-wired, so switching the breaker off for a minute is how a control hiccup is cleared.
Where is the model number on a Maytag wall oven?
On the oven frame, on the left or right edge, visible when the door is open.
Can the upper and lower Maytag ovens fault separately?
Yes, each cavity has its own sensors and latch.
What does F9 mean on a Maytag wall oven?
The oven appears to be wired incorrectly at the home supply; have an electrician check the connection.