Expanded manufacturer code library

JennAir expanded error-code library

Every JennAir error code on this site, grouped by product: dishwasher, range, wall oven. Choose the exact product family first, then read the code exactly as your display shows it, because the same characters can have unrelated meanings on a different device.

ProductExact codeMeaningFirst safe checkService boundary

Browse by platform

8 complete records in this directory

Reviewed records

8 exact answers

Diagnose the exact device problem
JennAir range · exact code

JennAir range code C81, C82, C83, H, Indicator Flashing, Indicator or Hot Light On: meaning and exact next steps

C81, C82, C83, H, Indicator Flashing, Indicator or Hot Light On means a cooktop surface area is hot, has overheated, or a key is held down

Open record
JennAir range · exact code

JennAir range code Cooling Fan Speed: meaning and exact next steps

Cooling Fan Speed means the cooling fan for the glass control is not holding its expected speed

Open record
JennAir range · exact code

JennAir range code F01: meaning and exact next steps

F01 means the control reports a fault in the oven temperature sensing group

Open record
JennAir range · exact code

JennAir range code F1-5: meaning and exact next steps

F1-5 means the oven control, the keypad or user interface, or the wiring between them reported a fault

Open record
JennAir range · exact code

JennAir range code F5: meaning and exact next steps

F5 means the door latch or the switch that reports its position has flagged a fault

Open record
JennAir range · exact code

JennAir range code F9-2: meaning and exact next steps

F9-2 means the door latch assembly, its switch or the wiring to them has reported a fault, in the older display form

Open record
JennAir range · exact code

JennAir range code Indicator Flashing: meaning and exact next steps

Indicator Flashing means the hot-surface indicator on an electric cooktop is flashing because a heating area is still very hot, has overheated or is covered by a held key

Open record
JennAir wall oven · exact code

JennAir wall oven code Door in Microwave Display: meaning and exact next steps

Door in Microwave Display means the control of a combination wall oven is waiting for the microwave door

Open record

JennAir error codes: dishwashers, ranges and wall ovens

JennAir appliances are premium kitchen products with sophisticated electronic controls, and when something goes wrong they report it with a code on the display or a pattern of lights. This library gives JennAir three directories: dishwashers, ranges and wall ovens. Each lists the codes JennAir documents, with what each means and the first check, and each separates the messages that clear themselves from the faults that need a technician.

Several JennAir designs make the code harder to see: a dishwasher with its control on the top edge of the door shows its display only when the door is open, a panel-ready unit hides behind a cabinet front, and a range with a glass touch panel can read a smudge as a stuck key. If you cannot see the code, open the door, wipe the panel dry and try again before you call. Find the model number: a dishwasher along the tub edge, a range or wall oven on the frame behind the door.

Steam and connected wall ovens add circuits, a water reservoir and a Wi-Fi module, with codes of their own, so check that the code you are reading belongs to your model. When a code returns after a cool-down and a power reset, it names a part; a JennAir appliance is worth a proper repair, but leave leaks, burning smells and wiring to a technician.

JennAir appliances often sit in custom cabinetry, which changes how you check them. A dishwasher behind a panel needs the door open to read its display; a wall oven in a tall unit may need the breaker found at the panel rather than a plug; a range with a glass control needs the panel dry before you press anything. Allow a few minutes for these and you avoid most unnecessary service calls.

A JennAir kitchen often mixes appliance types in one run of cabinets, so write down which appliance posted the code and what it was doing. A dishwasher code mid-cycle, an oven code at preheat and a microwave code after a long cook each have different first checks, and the directory pages for dishwashers, ranges and wall ovens separate them. JennAir model numbers are on the frame or the tub edge, and a technician will ask for them first.

Why can I only see the JennAir dishwasher code with the door open?

Many JennAir dishwashers have a control on the top edge of the door.

Do JennAir steam ovens have different codes?

Yes; the water reservoir, boiler and conductivity sensor have their own codes.

How do I reset a JennAir wall oven?

Switch its breaker off for a minute and restore it; wall ovens are hard-wired.

What does a JennAir technician ask first?

The appliance, the code, the model number and what it was doing when it stopped.